350-701 Dumps with Practice Exam Questions Answers

 Firepower NGIPS inline deployment mode is a mode where the NGIPS device is placed in the traffic path and can take actions such as blocking, modifying, or redirecting traffic based on the policies and rules. In this mode, the NGIPS device must have inline interface pairs configured, which are pairs of physical or logical interfaces that act as a single logical interface. The inline interface pairs are connected to the network devices on both sides of the NGIPS device, and the traffic flows through the NGIPS device from one interface to the other. The NGIPS device can inspect and modify the traffic as it passes through the inline interface pairs12. References := 1: Firepower Management Center Configuration Guide, Version 6.6 - Device Management Basics 2: Configure FTD Interfaces in Inline-Pair Mode

Network telemetry is a technology for gaining network insight and facilitating efficient and automated network management. It encompasses various techniques for remote data generation, collection, correlation, and consumption1. Network telemetry can be used for various purposes, such as network performance monitoring, security analysis, troubleshooting, and optimization. One of the applications of network telemetry is Layer 2 device discovery, which allows network operators to discover and map the physical topology of the network, including switches, routers, hosts, and links. Layer 2 device discovery can be achieved by using protocols such as Link Layer Discovery Protocol (LLDP) or Cisco Discovery Protocol (CDP), which enable network devices to advertise their identity, capabilities, and neighbors to other devices on the same network segment. To enable Layer 2 device discovery, network telemetry must be enabled on the network devices, so that they can send and receive LLDP or CDP packets. This feature requires network telemetry to be enabled, because without it, the network devices would not be able to exchange information about their topology and configuration. Therefore, the correct answer is C. Layer 2 device discovery. References: 1: RFC 9232: Network Telemetry Framework - Internet Engineering Task Force

DMVPN and sVTI are both VPN technologies that use IPsec to secure the tunnel traffic. However, they differ in how they establish and manage the tunnels. DMVPN supports dynamic tunnel establishment, which means that the VPN endpoints can create and delete tunnels on demand, based on the routing information. This allows for a scalable and flexible VPN topology, where the endpoints can communicate directly with each other without going through a central hub. sVTI, on the other hand, supports static tunnel establishment, which means that the VPN endpoints have to manually configure the tunnel source and destination addresses. This requires a one-to-one mapping between the endpoints, and limits the VPN topology to a hub-and-spoke model, where the endpoints can only communicate with the hub. Therefore, DMVPN is more suitable for large and dynamic VPN networks, while sVTI is more suitable for small and stable VPN networks. References:

[Implementing and Operating Cisco Security Core Technologies (SCOR) v1.0], Module 5: Secure Connectivity, Lesson 5.2: Implementing Site-to-Site VPNs, Topic 5.2.3: Dynamic Multipoint VPN (DMVPN)

what is difference between svti and DVTI? - Cisco Community

Microsegmentation is a network security technique that enables security architects to logically divide the data center or cloud environment into distinct security segments down to the individual workload level, and then define security controls and deliver services for each unique segment. Microsegmentation software with network virtualization technology is used to create zones in cloud deployments. These granular secure zones isolate workloads, securing them individually with custom, workload-specific policies. Microsegmentation uses a zero-trust model, which means that no traffic is allowed by default, and only explicitly authorized traffic is permitted based on the principle of least privilege. Microsegmentation helps to reduce the attack surface, prevent the lateral movement of threats, and strengthen regulatory compliance. The other options are incorrect because they do not describe microsegmentation accurately. Option B is incorrect because container orchestration platforms, such as Kubernetes, are used to automate the deployment, scaling, and management of containerized applications, but they do not provide microsegmentation by themselves. Option C is incorrect because private VLAN segmentation is a network security technique that isolates hosts within the same VLAN, but it does not provide granular security controls at the workload level. Option D is incorrect because host-based firewall rules are one of the components of microsegmentation, but they are not sufficient to implement microsegmentation without network virtualization and policy automation. References : What Is Microsegmentation? - Palo Alto Networks, What Is Micro-Segmentation? - Cisco, What is Micro-Segmentation? | VMware Glossary