New Year Day Special Limited Time 65% Discount Offer - Ends in 0d 00h 00m 00s - Coupon code: dpt65

HPE0-J68 Questions and Answers

Question # 6

A customer has a SAN infrastructure with the HPE C-class blade Enclosure ,and a mix of

proliant G7,gen8 and Ge9 server .They require a new storage platform ... How can you

confirm the storage array will be supported in the existing environment?

A.

Check recommended firmware levels in the HP SAN design reference guide to ensure firmware compatibility

B.

Document existing server and SAN information ,and consult SPOCK to ensure firmware compatibility

C.

Design and array with the latest firmware ,and recommend that the customer engage HPE point Next to upgrade the existing hardware

D.

Design an array with older version of the firmware to ensure compatibility

Full Access
Question # 7

What has to taken into account when performing capacity planning for HPE Nimble storage using deduplication?

A.

Deduplication is performed on a per volume basic

B.

Deduplication is performed on a per array basic

C.

Deduplication is performed on a per application category basic

D.

Deduplication is performed on a per pool and block size basic

Full Access
Question # 8

A customer is looking for a centralized file-sharing solution that can provide print services in addition to 15TB of storage.

Which solution component should you recommend?

A.

FC switch

B.

NAS

C.

FC-based array

D.

Disk enclosure with integrated SAS switch

Full Access
Question # 9

Which statement is correct when comparing functionalities of the AF and HF series in the Nimble storage portfolio? (Choose Two)

A.

Zero Copy Clones are a unique feature of All-Flash arrays within the Nimble Portfolio.

B.

>99.9999% availability is measured and guaranteed for AF and HF series arrays.

C.

HF series has a dedicated read cache and AF series does not have a dedicated reach cache.

D.

HF series supports storage snapshots and replication using Veeam Backup & Replication, HF and AF series support storage snapshots only

Full Access
Question # 10

A customer has an HPE 3PAR StoreServ 8200 with eight 3.84 TB SSD’s configured with RAID5 7+1. They plan to add four more 3.84 TB SSD’s.

What needs to be changed on the configuration once the new SSD’s are installed?

A.

Reconfigure the cpg setsize as RAID6 6+2 and wait for tunesys to complete.

B.

Change the availability level from cage to magazine.

C.

Adjust the cpg growth value to match amount of SSD’s.

D.

Change the cpg setsize to RAID5 5+1 and run tunesys.

Full Access
Question # 11

Where does HPE 3PAR StoreServ Data-at-Rest Encryption occur?

A.

ASIC

B.

physical disk

C.

processor

D.

host

Full Access
Question # 12

You are planning an upgrade to a customer’s existing HPE 3PAR StoreServ 8200 to include 4-port 16Gb FC adapters. The servers are zoned to see the storage via four paths. The customer is concerned about storage availability during the upgrade.

Which statement is correct about performing this upgrade?

A.

When NPIV is enabled, the HPE 3PAR Port persistence will show all four paths to the servers.

B.

The MPIO service will do a failover, and the servers will continue to have access via two paths.

C.

Windows servers require host explorer is installed to ensure MPIO is unaffected.

D.

As long as MEM driver is installed on VMware vSphere, no path failures are seen.

Full Access
Question # 13

Which function is built into the HPE 3par OS and enable users to move data and workloads

between array without impacting applications, users, or services?

A.

Peer persistence

B.

Adaptive optimization

C.

Peer motion

D.

Remote copy

Full Access
Question # 14

You have proposed a Primera array to a customer for new primary storage. The customer currently has an older 3PAR array that they will continue to use moving forward. The customer would like high

availability configured.

Which RMC Peer Copy pre-requisites do you need to point out to the customer? (Choose two.)

A.

No license is required

B.

2-port 10 Gb Ethernet Adapter (NIC) is required

C.

4-port 1 Gb Ethernet Adapter (NIC) is required in each array

D.

RMC 6.2 is required

E.

Target drive type must match source drive type

Full Access
Question # 15

A customer is planning to upgrade their HF40 controllers to support additional I/O requirements.

To which model can they upgrade to meet their new requirements?

A.

AF60

B.

AF40

C.

HF60

D.

HF40C

Full Access
Question # 16

A customer asks you for a recommendation on setting up their new StoreOnce appliance. They plan to use NetBackup and need the highest performance setup they can get. Their local hosts are connected

via FC and the rest are connected via a WAN.

Which backup target type should you recommend?

A.

VTL

B.

S3

C.

CIFS

D.

Catalyst

Full Access
Question # 17

You are proposing a new Nimble solution to a customer that recently experienced data loss in their existing storage array.

Which features of the Nimble array should you emphasize to your customer to address their concerns? (Choose two.)

A.

quick RAID rebuild

B.

deduplication

C.

compression

D.

encryption

E.

triple party

Full Access
Question # 18

Which tool is used to provide centralized management of 3PAR and Primera arrays?

A.

SMU

B.

Primera UI

C.

WebUI

D.

SSMC

Full Access
Question # 19

Match each HPE storage solution to its use case.

Full Access
Question # 20

A customer purchased a StoreOnce 3620 earlier in the year and has decided to add a 10GBase-Т adapter to it, which the customer sourced elsewhere and installed themselves. They complain that the new

adapter is not configurable.

What is the most likely reason for this issue?

A.

The StoreOnce software requires updating

B.

Secure boot must be enabled in the BIOS to securely enable HBAs

C.

The customer failed to install a License to Use (LTU) for it

D.

The StoreOnce needs to connect to InfoSight to validate the adapter authenticity

Full Access
Question # 21

You are designing a new enterprise array solution. The customer is interested in a caching tier that provides extremely low-latency and persistent storage at the same time. They also need to support more

than 500GB.

Which technology should you recommend?

A.

DRAM

B.

SRAM

C.

NVMe SCM

D.

NAND SSD

Full Access
Question # 22

A customer runs their core application on an aging HPE 3PAR StoreServ 20000 Storage array. The application requires 100% availability.

Which HPE storage solution should you recommend?

A.

Nimble

B.

Nimble dHCI

C.

Primera

D.

MSA

Full Access
Question # 23

A customer has a VMware environment running vSphere 6.5. They are running DL380 Gen10 servers with HPE 82Q adapters connected through a HPE SN3000B switch to a Nimble HF40. They plan to

upgrade the hypervisor.

What should they use to identify the latest firmware and compatibility information?

A.

SAN Health Diagnostics

B.

SPOCK

C.

OneView

D.

SAN Design Reference Guide

Full Access
Question # 24

Refer to the exhibit.

You are designing a new Primera solution and demonstrating performance numbers to the customer. The customer reviews the configuration and requests a change to the configuration that will increase Random Write IOPS.

Which action will satisfy the customer request?

A.

Add more disks of smaller capacity

B.

Upgrade the HPE Primera base model

C.

Change to larger SSDs

D.

Add more FC Ports

Full Access
Question # 25

Match the feature to the appropriate C-Series DCNM license type.

Full Access
Question # 26

A customer implemented the HPE StoreEver MSL6480 Tape Library.

Which HPE Software can the system administrator use to check the health of the library and monitor its utilization?

A.

OneView

B.

StoreServe TapeAssure Advanced

C.

StoreEver Data Verification

D.

InfoSight

Full Access