Activate Your Black Friday Offer: 75% Discount on Exam Bundles! Use coupon code below! - Ends in 0d 00h 00m 00s - Coupon code: 75onlydt

NS0-094 Questions and Answers

Question # 6

You receive the following AutoSupport message:

[Node-01: cshmd: hm.alert.raised:alert]:

Alert Id = ClusterSwitchConnectivity_Alert

Alerting Resource = Node-02

raised by monitor ethernet-switch

[Node-01: mgwd: callhome.hm.alert.major:alert]:

Call home for Health Monitor process cshm:

ClusterSwitchConnectivity_Alert[Node-02].

[Node-01: mgwd: callhome.hm.alert.major:alert]:

Call home for Health Monitor process cshm:

ClusterSwitchConnectivity_Alert[Node-02].

When researching, you discover the following output:

Exhibit 2 — Network Port Health

Cluster::* > network port show

-health-status degraded

-fields health-degraded-reasons

node port health-degraded-reasons

-------- ---- -----------------------

Node-02 e0a link_flapping

What action do you take to resolve this issue?

A.

Replace the SFP on port e0a on node-02.

B.

Update the RCF file on the cluster switches.

C.

Update the firmware on the cluster switches.

D.

Replace the SFP on port e0a on node-01.

Full Access
Question # 7

Which two commands confirm whether an aggregate is WAFL inconsistent? (Choose two.)

A.

wafiron show < aggregate >

B.

node run –node < node > sysconfig –r

C.

storage aggregate show

D.

node run –node < node > sysconfig –a

Full Access
Question # 8

What are two valid options for uploading a core file from a node that is running ONTAP 9.12.1 software to NetApp for analysis? (Choose two.)

A.

system node autosupport invoke -diagnostic

B.

Download via CIFS and upload to upload.netapp.com.

C.

Download via Service Processor Infrastructure (SPI) and upload to upload.netapp.com.

D.

system node autosupport invoke-core-upload

Full Access
Question # 9

A customer has a 4-node NetApp ONTAP cluster. There are two SVMs on the cluster. One SVM serves NFS home directories, and the other SVM serves SMB shares. Each SVM has one LIF per node using a dedicated port. The NFS SVM LIF is homed on port e1c, and the SMB SVM LIF is homed on port e2c on each node.

All ports and LIFs share the same layer 2 network in the same broadcast domain. There is a requirement that in the event of a physical port failure, NFS and SMB data must never share the same physical port.

Which action meets the requirement?

A.

Create DNS delegation records and modify the network interfaces to listen for a DNS query.

B.

Create new failover groups and modify the network interfaces failover group.

C.

Create a new IPspace and move the broadcast domain to the new IPspace.

D.

Configure the SVMs and data LIFs for host-name resolution using an external DNS server.

Full Access
Question # 10

You are replacing a boot device on a FAS8300 system that is running ONTAP 9.10P6 software. You attach a USB memory stick to the external USB port on the storage controller but cannot access the memory stick.

What step needs to be performed to access the boot device?

A.

Set the port to “enabled” with setenv.

B.

You need to use ONTAP 9.11 or later software.

C.

Add the boot device before the BIOS is loaded.

D.

The external USB port is not activated on NetApp systems.

Full Access
Question # 11

After you configure a new interface group with ports e2a and e2b, the ports are showing as down in the interface group.

Question # 11

Which two actions correct the issue? (Choose two.)

A.

Verify the switch side LACP configuration.

B.

Add the ports e2a and e2b to broadcast domain bd_data1.

C.

Modify ports e2a and e2b to -autonegotiate-admin false -speed-admin 40000.

D.

Ensure that the switch ports are correctly cabled.

Full Access
Question # 12

In which two sections of AutoSupport can you find information to analyze the following panic? (Choose two.)

Panic_Message: PCI Error NMI from device(s):ErrSrcID(CorrSrc(0xf00),UCorrSrc(0x18)), RPT(0,3,0):Qlogic FC 16G adapter in slot 1 on Controller

A.

HA-RASTRACE.TGZ

B.

ALL-COREDUMP.XML

C.

SSRAM-LOG

D.

PCI-HIERARCHY.XML

Full Access
Question # 13

Which type of AutoSupport message would you expect to see triggered automatically when ONTAP software detects a NetApp WAFL inconsistency on an aggregate?

A.

MEDIUM ERROR DURING RECONSTRUCTION

B.

CHECKSUM ERROR

C.

WAFL INCONSISTENT USER DATA BLOCK

D.

WAFL INCONSISTENT BLOCK

Full Access
Question # 14

Following an unexpected takeover, the taken-over node is waiting for giveback. The administrator plans to perform a giveback with the option –cfo–only true.

What happens if this option is used?

A.

Only a simulation of the giveback is performed.

B.

Only the root aggregate is given back.

C.

Only SVM root volumes are sent back

D.

Only the data aggregates are sent back.

Full Access
Question # 15

In a SAS stack of shelves, what is the topology of the connection between expander and disk?

A.

arbritrated loop

B.

point-to-point

C.

loop

D.

ring

Full Access
Question # 16

A customer replaced a data switch, and NetApp ONTAP software is showing the following output:

Question # 16

Why is the port shown as degraded after creating the VLAN?

A.

The port is not a member of the failover group for this VLAN.

B.

The interface group (ifgroup) is configured as active/standby.

C.

The VLAN is not configured on the connected data switch port.

D.

The connected data switch port is in a shutdown state.

Full Access
Question # 17

An NFS client is using nfs01_lif on homeport e0b on node1 for data traffic. After a head swap from node2, the administrator performs a takeover and notices that the client no longer has access to the data.

What caused the client to lose access to the data?

A.

The IPspace is configured for a CIFS workload.

B.

The subnet is configured to fewer IP addresses than necessary.

C.

The failover group is configured only with the e0b port from node1.

D.

There is no broadcast domain configured for NFS traffic.

Full Access
Question # 18

Which two statements are correct when describing L1 and L2 Watch Dog Resets (WDR)? (Choose two.)

A.

L2 WDR requests creation of a core dump before reset.

B.

L1 WDR is initiated after 0.5 seconds from the event.

C.

L1 WDR performs a soft reset.

D.

L2 WDR is initiated after 2 seconds from the event.

Full Access
Question # 19

Which two ONTAP systems support both SSD and SAS disks? (Choose two.)

A.

AFF C190

B.

FAS2750

C.

AFF A220

D.

FAS8200

Full Access
Question # 20

While setting up a replication between two clusters, an administrator receives the following error message:

Failed to create cluster peering with 'Error: RPC to peer address 192.168.31.10 failed'.

What is the cause of this issue?

A.

The cluster interconnect cables are faulty or have been disconnected.

B.

The nodes are running incompatible versions of NetApp ONTAP software.

C.

A license has expired or is invalid for one of the nodes.

D.

A firewall is blocking necessary communication ports.

Full Access
Question # 21

During a new SVM deployment, all of the FC LIFs are showing an admin/oper status of up/down. The LIF extended status is Waiting for Link.

What is causing this status?

A.

The FC cables are bad.

B.

The sync-destination LIF is in switchover state.

C.

NPIV is disabled on the switch.

D.

The switch fabric is not configured.

Full Access
Question # 22

Users are reporting slowness when accessing certain volumes with extremely high-performance requirements via NFSv3 on a four-node switched NetApp ONTAP cluster. Other volumes on the same cluster are behaving normally. Investigation reveals that there is a high amount of throughput recorded for the cluster LIFs.

What action enables you to determine which volumes are affected?

A.

View the active CIFS sessions on the cluster to determine the affected workloads.

B.

Check the NFS file locking lease period for the affected volumes.

C.

Review NFS export policies to ensure that client subnets are listed for the affected volumes.

D.

View the NFS connected client information and review the “Remote-Reqs” counter.

Full Access
Question # 23

Which LOADER prompt command ensures that POST is done on boot?

A.

setenv POST=true

B.

bye

C.

boot_diag

D.

boot_ontap

Full Access
Question # 24

You are reviewing the output of disk show and one of the disks is reporting a container type of “unknown”.

What is causing this status?

A.

The disk is not owned by a member of the high-availability (HA) pair.

B.

The disk is failed.

C.

The disk is in the maintenance center.

D.

The disk does not have an owner.

Full Access