Which command clears quota information, setting the quota balance to 0, the usage to its initial value, and the quota state to "Exhaust"?
CLR PQUOTA
RMV PQUOTA
RMV QUOTA
CLR QUOTA
Exact Extract — Core Network Responsibilities
“The core network is responsible for: Providing user connections; Mobility management and session management; User authentication; Charging management; Providing interfaces for connecting to external networks.”
— Huawei Training Material, Position and Main Functions of the Core Network, page 88.
Technical Deep Dive
Quota management controls the amount of network resource usage authorized for a subscriber or charging session. In prepaid and usage-controlled services, quota information typically includes an available allowance, measured usage, and the current quota state.
The scenario describes a quota-clearing operation with three specific results: the available quota balance becomes zero; the recorded usage returns to its initial value; and the quota state becomes Exhaust .
This behaviour is important because clearing a quota does not necessarily mean granting a new allowance. A zero balance combined with an exhausted state indicates that no further quota is available under the applicable quota-control conditions.
The proposed command is CLR PQUOTA . The CLR operation is consistent with clearing or resetting an existing runtime quota record, whereas the RMV alternatives imply removal of a quota configuration object or record.
However, the distinction between CLR PQUOTA and CLR QUOTA is Huawei-product-specific. It cannot be conclusively resolved from command naming alone. In production, a quota-clearing operation should be controlled carefully because it may affect charging enforcement and active sessions.
An engineer should verify the target subscriber, charging session, quota identifier, and expected state transition before executing such an operation.
Verification warning: The available training materials do not establish the exact post-execution semantics of CLR PQUOTA or CLR QUOTA . A is a provisional answer pending the Huawei quota-management MML reference.
Which of the following statements describe the advantages of IP address assignment by the UPF?
Select All that Apply
Adding SMFs and UPFs is easy, because peripheral devices do not need to be adjusted.
IP address assignment by the UPF provides simple planning and high address pool usage.
IP address assignment by the UPF is more applicable when one SMF is interconnected with multiple UPFs, or when one UPF is interconnected with multiple SMFs.
Not all address pools on the network need to be re-planned if SMFs need to be added to an SMF set.
Exact Extract
“The centralized CP simplifies O & M, improves O & M efficiency, and accelerates new service deployment. Distributed UP: The UP location is determined based on service delay requirements (for example, IoV services).”
— Huawei Training Material, Control and User Plane Separation, core-network architecture section.
Technical Deep Dive
In a 5G Standalone core network, UE IP addresses may be allocated by the SMF or by the UPF, depending on the operator's implementation and configuration. When UPF-based allocation is enabled, the UPF maintains or accesses the required IP address resources and performs address assignment under SMF control.
Option B: Locating address allocation at the UPF can simplify address management because subscriber address resources can be associated with the corresponding user-plane anchor. This can improve address-pool utilization and reduce unnecessary fragmentation across multiple SMF instances, provided that the UPF pools are correctly planned.
Option C: UPF-based allocation is particularly useful in many-to-many SMF–UPF topologies. Multiple SMFs can request address allocation from the same UPF without independently assigning overlapping addresses from its pool. Similarly, an SMF can select among several UPFs according to DNN, network slice, and service-area requirements.
Option D: When an additional SMF joins an SMF set, address allocation can remain under the existing UPF resource-management system. This reduces the need to repartition IP addresses among individual SMF instances.
Option A is incorrect because adding a UPF may require transport-network routing, address-pool advertisement, or other peripheral network configuration changes. UPF-based allocation does not universally eliminate those changes.
The SMF initiates IP allocation through PFCP signalling over N4. If the UPF performs allocation, it returns the allocated address in the PFCP response. A critical operational requirement is ensuring that address resources remain unique and that external routing correctly reaches the UPF anchoring the subscriber session.
In UNC 21.0, which command configures the S-NSSAIs supported by an AMF set on the NSSF?
ADD TACGROUPINNSSF
ADD AMFSETID
ADD CANDIDATEAMF
ADD CFGSNSSAI
Exact Extract — Network Slicing
“Network slicing enables operators to slice a network into multiple virtual networks on the same hardware infrastructure to allocate resources as required and flexibly combine capabilities. This technology enables different requirements of diverse services to be met.”
— Huawei 5G Training Material, Differentiated 5G Service Requirements, page 21.
Technical Deep Dive
The intended Huawei UNC command is ADD CFGSNSSAI . The Network Slice Selection Function (NSSF) determines which network slices are available for a UE and assists the network in selecting an appropriate AMF set.
A Single Network Slice Selection Assistance Information (S-NSSAI) identifies a network slice using two components: SST (Slice/Service Type), which identifies the general service category; and SD (Slice Differentiator), which optionally distinguishes slices that share the same SST.
For example, a network may provide a general mobile broadband slice and separate enterprise slices with different QoS and security requirements. The NSSF must understand the slice capabilities associated with AMF sets so that it can determine suitable AMF candidates during registration and slice selection.
ADD CFGSNSSAI is used in Huawei UNC NSSF configuration workflows involving supported S-NSSAI information. ADD TACGROUPINNSSF relates to tracking-area group configuration, ADD AMFSETID relates to AMF set identification, and ADD CANDIDATEAMF relates to candidate AMF information.
Those configuration objects may participate in the wider network slice selection procedure, but the question specifically concerns configuring supported S-NSSAIs. A configuration mismatch between the AMF's advertised slice capabilities and NSSF slice information can cause network slice selection failures or registration restrictions.
The exact UNC 21.0 command syntax should be checked against the corresponding release's MML reference before production execution.
Which of the following procedures are used to define a subscriber in UDM 21.0?
Select All that Apply
Subscriber definition and subscription
Preparing a service template
Configuring authentication data
Configuring global data
Exact Extract — Core Network Responsibilities
“The core network is responsible for: Providing user connections; Mobility management and session management; User authentication; Charging management; Providing interfaces for connecting to external networks.”
— Huawei Training Material, Position and Main Functions of the Core Network, page 88.
Technical Deep Dive
Huawei Unified Data Management (UDM) provides centralized subscriber identity, authentication subscription, access authorization, and service subscription management. The proposed subscriber provisioning workflow incorporates all four activities.
A. Subscriber definition and subscription: Creates the subscriber's identity and associates the necessary service subscriptions. Subscriber information typically includes the IMSI/SUPI, MSISDN/GPSI where applicable, and the associated 5G subscription profile.
B. Preparing a service template: A service template allows common subscription parameters to be provisioned consistently across multiple subscribers. Templates reduce repetitive configuration and help operators maintain consistent default service characteristics.
C. Configuring authentication data: The authentication repository must hold the credentials required to authenticate subscribers. For 5G-AKA, this includes the long-term authentication key and related authentication parameters. Such credentials must be protected using the product's supported security and provisioning controls.
D. Configuring global data: System-wide subscriber management parameters and supporting configuration objects must be established so that subscriber records and templates can be interpreted correctly.
The UDM subsequently supplies subscription information to network functions including the AMF and SMF, while authentication data is used to support the AUSF/UDM authentication procedure. Huawei's subscriber provisioning command reference documents subscriber creation, service templates, authentication-key provisioning, and other subscriber-related data management functions.
Verification qualification: These four activities form a technically valid provisioning workflow. The exact four-step classification has not been independently confirmed against the UDM 21.0 provisioning chapter.
Which of the following statements regarding Service Based Architecture (SBA) is incorrect?
Network functions are decoupled and organized.
A service can be invoked by more than one NF, reducing the coupling degree of interfaces between NFs.
All core network NFs use service-based interfaces (SBIs) to interact with each other.
Network-wide functions can be customized on demand to meet various service requirements.
Exact Extract — Service-Based Architecture
“Modularized network functions facilitate function decoupling and integration. Decoupled network functions are abstracted as network services, which can be independently expanded, evolved, and deployed on demand. All network functions on the control plane interact with each other through service-based interfaces. A service can be invoked by multiple network functions, reducing the coupling degree defined for interfaces between network functions. In addition, network-wide functions can be customized on demand to support different service scenarios and requirements.”
— Huawei Training Material, SBA Network Architecture, page 93.
Technical Deep Dive
The 5G Service-Based Architecture enables loosely coupled communication between control-plane network functions. Rather than maintaining only dedicated point-to-point interfaces between every pair of network elements, the architecture allows network functions to expose services that other authorized network functions can consume.
Service-based communication is typically implemented using HTTP/2, REST-style service operations, JSON-formatted data, and the applicable service security mechanisms.
A. Network function decoupling: Network functions are decomposed into independently manageable functional components. This improves deployment flexibility and scalability.
B. Shared service consumption: A service exposed by one NF may be consumed by several other network functions, reducing the need for tightly coupled signalling implementations.
D. On-demand customization: Operators can deploy network functions and services according to specific requirements, including network slice and enterprise service scenarios.
Why C is incorrect: Not all 5G core network functions communicate exclusively through service-based interfaces. For example, the UPF communicates with the SMF through N4 using PFCP. The UPF also exchanges user-plane traffic through interfaces such as N3, N6, and N9. These interfaces are not service-based HTTP interfaces.
The SBI architecture primarily governs service interactions among applicable 5G control-plane network functions, rather than replacing every user-plane or reference-point protocol. Therefore, C is correct as the incorrect statement.
Which of the following statements correctly describe the benefits of 5G service auto-provisioning on the UDM?
Select All that Apply
Subscriber data is migrated when 5G services are provisioned. Subscribers are unaware of the 4G-to-5G handover, which results in smooth migration to 5G.
Subscribers using 5G UEs with USIM cards can enjoy 5G services out of the box without manual subscription or new IMSIs or MSISDNs.
Carriers allow subscribers to use 5G services without manual subscription or new IMSIs or MSISDNs.
Carriers can quickly expand their 5G subscriber base.
Exact Extract
“The core network is responsible for: Providing user connections; Mobility management and session management; User authentication; Charging management; Providing interfaces for connecting to external networks.”
— Huawei Training Material, Position and Main Functions of the Core Network, page 88.
Technical Deep Dive
Huawei UDM service auto-provisioning is intended to simplify the introduction of 5G subscriptions for existing mobile-network users. In a conventional provisioning model, an operator may need to create or update subscriber records manually before the subscriber can access 5G services. This becomes operationally expensive when millions of existing LTE subscribers are migrated to 5G.
Auto-provisioning allows the operator to automate the preparation of appropriate 5G subscription information based on existing subscriber records and configured provisioning rules.
Option A: Existing subscriber information can be reused or migrated to support 5G registration and service access. This facilitates a smooth commercial transition from LTE to 5G without requiring subscribers to participate in manual subscription procedures. The wording about handover should be understood as service migration, not necessarily a radio handover.
Options B and C: Eligible subscribers can retain existing IMSIs, MSISDNs, and compatible USIM credentials when transitioning to 5G. A new subscription identifier or physical SIM replacement is not inherently required merely because the subscriber begins using 5G.
Option D: Automation reduces the administrative work involved in large-scale 5G subscriber activation and allows carriers to expand the eligible subscriber base more efficiently.
The UDM must still maintain valid access and mobility subscription data, authentication information, subscribed S-NSSAIs, and session-management subscription information. Auto-provisioning does not override subscription authorization or equipment compatibility requirements. A UE must support the applicable 5G radio technology, and the subscriber must be authorized for the requested services. Therefore, all four options represent the intended benefits of 5G service auto-provisioning.
Which of the following statements concerning a SUCI is incorrect?
A SUCI is a temporary identifier used to hide a SUPI.
The AMF/SEAF supports SUCI-based authentication.
A SUCI is generated by a UE (USIM or ME) and decoded by the UDM/SIDF.
The Routing Indicator in a SUCI can be used to address the AUSF, UDM, and PCF.
Exact Extract — 5G Security Terminology
“IMSI: International Mobile Subscriber Identity; TMSI: Temporary Mobile Subscriber Identity; SUCI: Subscription Concealed Identifier.”
— Huawei Training Material, 5G Network Security Terminology.
Technical Deep Dive
The Subscription Concealed Identifier (SUCI) protects the permanent subscriber identity when identification information is exchanged over the access network. The Subscription Permanent Identifier (SUPI) uniquely identifies a subscriber within the relevant 5G subscription domain. SUCI contains identification and protection information that allows the home network to recover the concealed subscriber identity.
Its principal fields can include SUPI type, Home Network Identifier, Routing Indicator, Protection Scheme Identifier, Home Network Public Key Identifier, and Scheme Output.
A. SUCI protects the SUPI: The UE generates a SUCI using the applicable protection scheme. Unlike a conventional temporary identity such as the 5G-GUTI, the SUCI is a concealed representation associated with the SUPI.
B. Authentication using SUCI: The AMF/SEAF can initiate authentication using the SUCI. The authentication procedure involves the AUSF and UDM.
C. Generation and de-concealment: The SUCI is generated by the UE, with processing performed by the USIM or mobile equipment according to the supported protection arrangement. The UDM's Subscription Identifier De-concealing Function (SIDF) recovers the SUPI.
D. Routing Indicator: The Routing Indicator assists with selecting an appropriate AUSF or UDM instance. It is not defined as a general mechanism for addressing the PCF. 3GPP TS 23.003 explicitly identifies AUSF and UDM instance routing as a purpose of the SUCI Routing Indicator.
Therefore, D is incorrect. Terminology qualification: Option A uses the word temporary imprecisely. SUCI is a concealed subscriber identifier, not a temporary identity of the same kind as a 5G-GUTI. D remains the clearest intended incorrect statement.
Which of the following is not an O & M challenge introduced by NFV?
O & M organizations are not established for new NFVI components, and O & M personnel with NFV O & M skills are insufficient.
Service KPIs are changed, for which new O & M skills need to be developed.
O & M processes are not defined in different scenarios for new components.
IT hardware, cloud OS, VMs and related components, and MANO (VIM, VNFM, and NFVO) are introduced. In addition, NE structures are changed.
Exact Extract
“Full-stack cloudification and services: Full-stack cloudification (NFVI and VNF) enables quick resource orchestration, and full-stack services (AMF, SMF, UPF, PCF, UDM and IMS) enable quick function orchestration.”
— Huawei 5G Training Material, 5G Core Network Architecture, page 98.
Technical Deep Dive
Network Functions Virtualization (NFV) changes how telecommunications network functions are deployed, monitored, maintained, and recovered. Traditional network elements commonly operate on dedicated telecommunications hardware. NFV replaces much of this equipment dependency with virtualized software deployed over shared infrastructure.
Option A describes an organizational challenge. Operators must develop expertise in virtualization, cloud networking, hypervisors, virtual machines, and infrastructure orchestration. Existing O & M teams may not have these skills.
Option C describes a process-management challenge. New procedures are required for VM failures, infrastructure alarms, resource scaling, virtual networking problems, and multi-layer fault isolation.
Option D describes the additional architectural complexity introduced by NFV. Engineers must manage relationships between the service layer, VNF layer, virtualization infrastructure, and management-and-orchestration systems.
Option B is the intended incorrect statement. NFV introduces additional infrastructure performance indicators and monitoring requirements, but virtualization does not inherently change the fundamental service KPIs used to assess customer-facing telecommunications services.
For example, registration success rate, session establishment success rate, service availability, and session latency remain relevant regardless of whether network functions run on dedicated hardware or virtual machines. Operators may need new infrastructure KPIs for CPU scheduling, memory consumption, virtualization overhead, and network throughput, but these complement rather than automatically replace the existing service KPIs.
Huawei's NFV architecture emphasizes cross-layer monitoring and KPI-driven health checks to maintain carrier-grade service availability.
Which of the following triggers must be configured to deliver policies through the N7 interface?
IPCAN_EST
PRA_CH
PLMN_CH
US_RE
Exact Extract
“Modularized network functions facilitate function decoupling and integration. Decoupled network functions are abstracted as network services, which can be independently expanded, evolved, and deployed on demand.”
— Huawei Training Material, SBA Network Architecture, page 93.
Technical Deep Dive
The N7 interface connects the Session Management Function (SMF) and Policy Control Function (PCF). Through N7, the PCF provides session policy decisions and receives information about session-related events.
Three options are defined N7 policy control request triggers.
B. PRA_CH: The PRA_CH trigger indicates a change in the UE's presence within a Presence Reporting Area. It can be used when policy behaviour depends on whether a subscriber enters or leaves a designated geographical area.
C. PLMN_CH: The PLMN_CH trigger indicates that the serving Public Land Mobile Network has changed. This allows the PCF to reassess policy conditions associated with the subscriber's serving network.
D. US_RE: The US_RE trigger indicates that usage-related information must be reported, such as when a usage-monitoring threshold is reached. This can support policy updates based on subscriber resource consumption.
Why A is incorrect: IPCAN_EST is associated with legacy EPC IP-CAN session establishment policy events and is not one of the standardized 5G N7 PolicyControlRequestTrigger enumeration values.
3GPP TS 29.512 explicitly defines PRA_CH , PLMN_CH , and US_RE as N7 policy control request triggers. These triggers are configured according to policy requirements. They are not universally mandatory for every N7 session policy association; initial policy creation can occur without all three.
Which IE in the Registration Request message indicates the UE's capability to access a 4G network?
S1 UE network capability
Payload container
NAS message container
5GMM capability
Exact Extract
“As specified in the 3GPP specifications, there are two standards for 5G network architectures: standalone (SA) mode and non-standalone (NSA) mode. In NSA mode, eNodeBs and gNodeBs coexist on the radio access network (RAN), and the EPC or 5GC is used as the core network.”
— Huawei Training Material, 5G Networking Architecture, page 82.
Technical Deep Dive
The 5GMM capability information element carries capabilities related to the UE's operation in the 5G mobility-management framework. An important field is the S1 mode supported bit. This bit indicates whether the UE supports operation in the EPC NAS environment associated with LTE access.
The relevant values are S1 mode = 0: S1 mode not supported and S1 mode = 1: S1 mode supported .
When the UE supports the appropriate LTE/EPC functionality, this information assists the network with mobility and interworking decisions.
The distinction between options A and D is important. The S1 UE network capability IE provides more detailed EPC-related security and network capability information. However, the specific indication of whether S1 mode is supported is carried in the 5GMM capability IE.
The Payload Container and NAS Message Container serve different purposes. They transport information associated with NAS signalling and do not independently define the UE's 4G access support.
3GPP TS 24.501 defines the S1 mode support bit within the 5GMM capability information element. Therefore, D is correct.
In UDG 21.0, which command displays statistics on how many times a static rule has matched packets for a specified subscriber, together with traffic statistics for that rule; or displays information about a flow matching a dynamic rule, together with traffic statistics for that rule?
DSP USERRUNINFOSTATE
DSP SMCTX
DSP PDPINFO
DSP PDUSESSION
Exact Extract
“Anchor point for mobility management on the user plane; PDU session node; Downlink data routing and forwarding; User-plane data detection and policy execution; Uplink service type identification; QoS-based packet filtering and processing.”
— Huawei 5G Training Material, Main Network Functions of the 5GC, UPF section, page 95.
Technical Deep Dive
The intended Huawei UDG command is DSP USERRUNINFOSTATE . Huawei UDG provides user-plane packet forwarding, traffic detection, QoS enforcement, and traffic statistics collection.
In policy-controlled packet processing, static and dynamic rules can determine how subscriber traffic is identified and handled.
Static rules are predefined packet-processing rules available in the configured rule database. When subscriber traffic matches a static rule, the UPF can maintain counters indicating the number of matching packets and the corresponding traffic volume.
Dynamic rules are installed or modified during session operation, commonly under SMF control through PFCP signalling. Dynamic rules can be associated with particular application flows, subscriber sessions, or policy-control decisions.
DSP USERRUNINFOSTATE is intended to display subscriber rule-matching and associated traffic statistics. This information helps engineers determine whether traffic is matching the expected policy rule, whether a configured rule is active, and whether the corresponding traffic counters are increasing.
The other commands primarily relate to subscriber context or session information rather than the specific rule-matching statistics described. For example, DSP PDUSESSION displays SMF PDU session information, including session and QoS attributes.
In a production UPF, packet detection and forwarding performance may be accelerated by DPDK, SR-IOV, or dedicated packet-processing hardware. The exact packet counter implementation depends on the platform.
Which statement below is incorrect regarding the JSON and COMMOND configuration modes for NF instance information?
In JSON mode, the length of NF instance information is limited.
COMMOND is not recommended because it is complicated and is not applicable to commercial live networks.
JSON is applicable to simplified configuration.
In COMMOND mode, the configuration parameters are highly extensible.
Exact Extract — Network Function Architecture
“Modularized network functions facilitate function decoupling and integration. Decoupled network functions are abstracted as network services, which can be independently expanded, evolved, and deployed on demand.”
— Huawei Training Material, SBA Network Architecture, page 93.
Technical Deep Dive
Huawei's service-based network architecture allows NF instance information to be configured and maintained through structured configuration mechanisms. The distinction in this question concerns the representation and extensibility of NF instance configuration information.
JSON configuration mode uses JavaScript Object Notation to represent structured parameters. It is useful for simplified NF instance configuration, particularly where a standardized configuration structure can be represented as one JSON object. JSON can express nested objects, arrays, identifiers, and service attributes, although a particular Huawei configuration interface may impose limits on the size of a single submitted configuration object.
COMMOND configuration mode, as named in this question, represents an alternative command-oriented Huawei configuration mechanism. Its intended advantage is more granular configuration and extensibility where individual parameters or configuration objects must be managed independently.
Option B makes an absolute claim that COMMOND is unsuitable for commercial live networks. Configuration complexity does not, by itself, make an operational configuration method unsuitable for production. Production suitability depends on Huawei's documented support, version compatibility, configuration controls, and operational procedures.
Options C and D are consistent with the intended distinction between simplified JSON configuration and more extensible command-oriented configuration. Option A should be interpreted as a Huawei implementation limitation rather than a limitation inherent to the JSON format.
Verification warning: The exact JSON/COMMOND behaviour, including any length restriction, requires the Huawei UNC 21.0 NF instance configuration reference. The available training PDF confirms modular SBA concepts but does not establish these two product-specific modes. Consequently, B is the most defensible intended answer, not a fully verified command-reference finding.
Which of the following is not an advantage of VM-based containers?
Services can be isolated between tenants.
Containers start up fast, and provide performance approximating that of bar e-metal containers.
The container platform can be decoupled from NFVI.
NFVI can be shared with existing VNFs.
Exact Extract
“Microservice-based software architecture: Lego-style service combination is more suitable for flexible 5G services.”
— Huawei 5G Training Material, 5G Core Network Architecture, page 98.
Technical Deep Dive
VM-based containers deploy containerized applications inside virtual machines rather than directly on physical servers. The infrastructure typically consists of physical hardware, a virtualization layer, guest operating systems, and a container runtime.
A. Tenant isolation: VM-based containers benefit from VM-level isolation. Different tenants can be assigned separate virtual machines, providing stronger security boundaries than relying exclusively on container namespaces.
C. Infrastructure decoupling: The virtualization layer abstracts the underlying server hardware and networking resources. Consequently, container management components can operate through standardized virtual infrastructure interfaces rather than depending on specific physical hardware.
D. Shared NFVI: VM-based container deployments can reuse existing NFVI environments alongside traditional VNFs. This reduces the need to introduce a separate physical infrastructure platform.
Why B is incorrect: VM-based containers start quickly because application containers share the guest operating system kernel. However, their packet-processing performance is still affected by the virtual machine and hypervisor layers. Bare-metal containers execute directly over the physical server's operating system and can avoid portions of the virtualization overhead.
Consequently, bare-metal deployments are generally better suited to workloads with stringent packet-processing or latency requirements. Huawei's container architecture comparison explicitly distinguishes VM-based container performance as similar to VMs, while bare-metal container performance is similar to physical machines.
In high-throughput 5G UPF deployments, technologies such as DPDK, SR-IOV, NUMA-aware placement, and CPU pinning can mitigate virtualization overhead, but they do not make the two architectures inherently equivalent. Therefore, B is correct.
TESTED 21 Nov 2026
Copyright © 2014-2026 DumpsTool. All Rights Reserved