Summer Sale - Special Limited Time 65% Discount Offer - Ends in 0d 00h 00m 00s - Coupon code: dpt65

H35-210 Questions and Answers

Note! Following H35-210 Exam is Retired now. Please select the alternative replacement for your Exam Certification. The new exam code is H35-210_V2.5

H35-210 Questions and Answers

Question # 6

(single) Is the following description correct? ADSL2+ is an extension of ADSL technology, supporting downlink rates up to 24 Mbit/s and uplink rates of 2.5 Mbit/s, with a maximum transmission distance of 6.5 km.

A.

True

B.

False

Full Access
Question # 7

(Single) The UA5000 narrowband main control board PVM and the broadband main control board IPM are connected to each other to provide voice services and broadband services. The voice service is transmittedto the IPM board through the internal IP channel, and then transmitted to the upper layer by the uplink interface of the IPM board. Network, which command should be used to configure the system networking mode?

A.

uplink tps on

B.

uplink tps off

C.

working mode integrated

D.

working mode alone

Full Access
Question # 8

(single) In the Solaris environment, which of the following commands (parameters) is used to unconditionally abort the process?

A.

kill -7 pid

B.

kill -8 pid

C.

kill -9 pid

D.

kill -10 pid

Full Access
Question # 9

Features of GPON frame include:

A.

GPON frame length is fixed at 125us

B.

GPON downstream frame consists of frame header and payload

C.

GPON upstream and downstream frame structure is different

D.

Only the downstream frame contains Bandwidth Map

Full Access
Question # 10

(Multiple) The MA5600 system comes with 4 default ADSL line profiles. Which of the following templates are available when the system isshipped from the factory?

A.

1

B.

2

C.

1001

D.

1002

Full Access
Question # 11

(single) Is the following description correct? The MA5612 provides a serial port. It supports the external interface cable of CONSOLE and ETH in the normal running phase of the device. It is also used as the maintenance serial port and maintenance network port.

A.

True

B.

False

Full Access
Question # 12

(single) Is the following description correct? Triple Play refers to multiple different service access modes on one subscriber line.

A.

True

B.

False

Full Access
Question # 13

(single) In the H.248 protocol, how to apply for gateway registration?

A.

MOD_REQ is sent by the MGto the MGC

B.

MOD_REQ is sent by the MGC to the MG

C.

SVC_CHG_REQ is sent by the MG to the MGC

D.

SVC_CHG_REQ is sent by the MGC to the MG

Full Access
Question # 14

(single) The MA5680T supports the QinQ and VLAN stacking attributes. Which of the following VLANs supports the QinQ attribute?

A.

Common vlan

B.

super vlan

C.

sub vlan

D.

smart vlan

Full Access
Question # 15

(single) When the MA5600T/MA5603T device needs to be maintained andmanaged locally, you can log in to the system through the local serial port. Which interface is the RS-232 serial cable RJ-45 network port connector connected to?

A.

Maintain the network port of the PC

B.

“CON” port on the main control board

C.

"ETH" porton the main control board

D.

"ESC" port on the main control board

Full Access
Question # 16

Which of the following methods does the (multiple) VLAN division?

A.

Based on the port

B.

Based on MAC address

C.

Based on the agreement

D.

Based onphysical location

Full Access
Question # 17

(single) Among the access technologies of the access network, which of the following access modes can provide the largest access bandwidth?

A.

ADSL

B.

ADSL 2+

C.

VDSL

D.

GPON

Full Access
Question # 18

(single) Is the following description correct? The MA5600T can support multiple broadband access services such as ADSL2+, SHDSL and VDSL2.

A.

True

B.

False

Full Access
Question # 19

(single) The MA5600T confirms the auto-discovered board. Which command is used?

A.

board add

B.

board confirm

C.

board add and board confirm

D.

None of the above

Full Access
Question # 20

(single) Which of the following slotscan the TSSB board in the UA5000 high-density be inserted?

A.

4,5

B.

6,7

C.

16

D.

17

Full Access
Question # 21

(single) Is the following description correct? The larger the return loss, the better. In general, the return loss of APC is greater than that of PC type connector.

A.

True

B.

False

Full Access
Question # 22

(single) The following description of the MA5680T GPBD board, which is wrong?

A.

Support 8 GPON SFP interfaces

B.

Supports a maximum 1:64 split ratio.

C.

Supports Class B+ and Class C+ optical modules.

D.

Support high temperature automatic shutdown

Full Access
Question # 23

(single) Which of the following is incorrect aboutGPON?

A.

Each GPON port, with a 1:64 split ratio, provides 64 ONT access.

B.

There can be multiple T-CONTs on each ONU, and each TCONT can be tied to multiple GEMPORTs.

C.

T-CONT is equivalent to a physical cache, and only the DBA template is bound tolimit the speed.

D.

ONU ID must be unique on the OLT

Full Access
Question # 24

(single) In the 802.1Q tag header, how many VLANs is the VLAN ID, how many VLANs can be specified?

A.

4;16

B.

8;256

C.

10; 1024

D.

12;4096

Full Access
Question # 25

(single) Which index range does the MA5600 extended access control list have?

A.

1-999

B.

1000-1999

C.

2000-2999

D.

3000-3999

Full Access
Question # 26

(single) The default tag conversion rule (that is, the tag-transform is set to default) of the MA5600T for the three different attributes of the VLAN (that is, common, QinQ, and stacking). Which of the following is incorrect?

A.

The default mode of all QinQ VLAN traffic flows is add

B.

common vlan service flow, for the service flow without tag, the default is add, for the serviceflow with tag defaults to translate

C.

stacking vlan service flow, the default is add-double for tags without tag; the default for translate-and-add for tagged traffic

D.

None of the above

Full Access
Question # 27

In the PPP protocol, if the protocol field is set to 8021, which protocol does it indicate?

A.

LCP protocol

B.

IPCP protocol

C.

IP protocol

D.

IPX protocol

Full Access
Question # 28

(single) Which of the following symbols is used to indicate all terminals in the H.248 protocol?

A.

"*"

B.

"$"

C.

"-"

D.

"root"

Full Access
Question # 29

(multiple) In the EPON PPPoE service configuration process, what are the templates that need to be configuredto increase the MDU?

A.

System parameter template

B.

Traffic template

C.

Line template

D.

DBA template

Full Access
Question # 30

(single) Is the following description correct? The VDSL2 standard specifies a frequency band division of up to 30 MHz, which enables high-speed data transmission of up and down symmetrical 100 Mbit/s in a shortdistance.

A.

True

B.

False

Full Access
Question # 31

(single) Which of the following H.248 protocol message types can be initiated by the MG?

A.

ServiceChange

B.

AuditCapabilities

C.

AuditValue

D.

Modify

Full Access
Question # 32

(single) For the GPON line, the MA5600T/MA5680T supportsmultiple protection switching modes. Which of the following protection technologies does the MA5600T/MA5680T support for both the backbone fiber and the branch fiber?

A.

Type A

B.

Type B

C.

Type C

D.

Type D

Full Access
Question # 33

(single) According to the IEEE 802.1Q standard, where is the VLAN identification field inthe Ethernet frame?

A.

Before the source MAC address and the destination MAC address

B.

Between the source MAC address and the destination MAC address

C.

After the source MAC address and the destination MAC address

D.

Not fixed

Full Access
Question # 34

(single) Regarding the running status indicator (RUNALM) of the MA5600T main control board, which of the following states indicates that the board is operating normally?

A.

The green 1s is on for 1 s. The blinking period indicates that the board is running normally.

B.

Green 0.5s bright 0.5s off cycle flashing

C.

Green 0.25s bright 0.25s off cycle flashing

D.

Green bright

Full Access
Question # 35

(single) In Ethernet, what address is used to distinguish different devices?

A.

LLC address

B.

MAC address

C.

IP address

D.

IPX address

Full Access
Question # 36

(single)根据由ITU-T G.984.x系列标准规范,GPON网络下行传输波长是多少nm?

A.

850

B.

1310

C.

1490

D.

1550

Full Access
Question # 37

(Single) The international organization responsible for assigning IP addresses divides several network segments into private network segments, which can be freely allocated for use on private networks. Which of the following is not a private network segment?

A.

10.0.0.0/8

B.

172.16.0.0/16

C.

192.168.0.0/16

D.

224.0.0.0/8

Full Access
Question # 38

(single) The MA5600T/MA5680T system has a super user level by default. It cannot be added or deleted. What is the default super user name/password?

A.

root/root

B.

root/admin

C.

admin/admin

D.

admin/root

Full Access
Question # 39

(single) Which of the following does not belong to the ONT product?

A.

HG510V

B.

HG8010

C.

HG8245

D.

HG8247

Full Access
Question # 40

(single) Is the following description correct? The VPI/VCI of an ATM cell is only of local importance, and itsVPI / VCI value can be changed at each node in the transmission process.

A.

True

B.

False

Full Access
Question # 41

(single) Which method does the BTV service use to send messages on the network?

A.

Broadcasting

B.

Multicast

C.

Unicast

Full Access
Question # 42

Are the following statements correct? In GPON transmission, GEM port-ID is a unique identifier that represents a service flow under a PON port.

A.

True

B.

False

Full Access
Question # 43

(single) Regarding the ATM network, which of the following descriptions is wrong?

A.

Support fixed length exchange

B.

Working at the network layer of the OSI model

C.

Reduce the processing time of intermediate nodes and support high-speed transmission

D.

Guaranteed Quality of Service Performance Indicators (QOS) for various services

Full Access
Question # 44

(single) Which layer does the ATM protocol work on?

A.

Physical layer

B.

Link layer

C.

Network layer

D.

Transport layer

Full Access
Question # 45

(single) How many Bytes does the EthernetII header (without the VLAN TAG tag) include?

A.

18

B.

14

C.

22

D.

32

Full Access
Question # 46

(multiple) What types of main control boards are supported by the MA5600T?

A.

SCUB

B.

SCUF

C.

SCUL

D.

SCUN

Full Access
Question # 47

(single) Is thefollowing description correct? The M5600T/MA5680T SVLANs and CVLANs are forwarded through SVLANs and CVLANs on the service board. The SPUs are forwarded through the VLANs and MAC addresses on the main control board. SVLANs and CVLANs are forwarded throughthe SVLANs on the service board and the main control board. + CVLAN forwards packets.

A.

True

B.

False

Full Access
Question # 48

(single) Is the following description correct? The board package file of the MA5680T includes all the supported board software. You do not need to use so many boardsoftware in actual use. Therefore, you can use the unpack tool to create a small package to improve the upgrade efficiency.

A.

True

B.

False

Full Access
Question # 49

(single) Is the following description correct? Ethernet technology is a widely used technology. It is divided into 10M, 100M, and 1000M according to different transmission rates. The common transmission medium for 10M and 100M Ethernet is twisted pair, but1000M Ethernet is too fast. The transmission medium must be optical fiber.

A.

True

B.

False

Full Access