Summer Sale - Special Limited Time 65% Discount Offer - Ends in 0d 00h 00m 00s - Coupon code: dpt65

H31-341 Questions and Answers

Note! Following H31-341 Exam is Retired now. Please select the alternative replacement for your Exam Certification. The new exam code is H31-341_V2.5

H31-341 Questions and Answers

Question # 6

Which of the following statements about the latency of a storage and forwarding device is false?

A.

The last bit of the data frame enters the device and starts timing.

B.

The first bit of the data frame enters the device and starts timing.

C.

Reflects the performance of network devices. Generally, it is not compared with the bit forwarding device.

D.

The first bit of the data frame appears at the output port of the device and stops timing.

Full Access
Question # 7

Which of the following statements about the line fiber quality monitoring performance parameters is wrong?

A.

The pulse width of emitted optical pulses varies according to monitoring modes, and affects the detection distance and measurement precision. A greater pulse width provides a larger dynamic range, longer detection distance and better measurement precision.

B.

When the pulse width increases, the light emitting time increases and consequently a larger energy is obtained. This means that a larger dynamic range can be acquired but also larger dead zones will result.

C.

Measurement is performed multiple times within the detection time. The average value is obtained based on the measurement results to improve the measurement precision. The actual duration from the time when a detection event starts to the time when the detection results are returned will be longer than the Detection time.

D.

The total fiber loss will affect the detection distance and the dynamic range is fixed for the same detection mode. Therefore, a larger total fiber loss indicates a smaller detection distance.

Full Access
Question # 8

The troubleshooting methods that can be used to separate external faults are:

A.

Configuration Data Analysis

B.

Meter Test

C.

Replacement

D.

Loopback

Full Access
Question # 9

Which of the following OTN trails does not need to be manually configured on an ROADM site, and can search out directly?

A.

OSC

B.

OCh

C.

OMS

D.

OTS

Full Access