Regarding the Huawei smart modular module solution, which of the following statements are correct?
Select all that apply
FusionModule800 and FusionModule500 integrate cooling and electrical control. They are highly integrated and fully prefabricated, featuring a fully enclosed aisle with wet-film humidification and supporting smart mobile management.
Huawei FusionModule800 is a modular data center solution designed for financial outlets and small enterprise data centers. It is easy to deploy, clean, and reliable, and can perfectly meet the application requirements of these scenarios.
The FusionModule2000 adopts the simplified design concept. It has low footprint and high requirements on low floors. It does not require raised floors. It supports modular deployment and supports one-click commissioning. The implementation time is shortened from 30 days to 7 days.
In the FusionModule800 and FusionModule500, fire extinguishers can be deployed in the fire extinguishing module. The built-in fire extinguishing gas can meet the fire extinguishing requirements of the entire room.
Huawei's smart modular data center portfolio provides integrated infrastructure solutions for edge computing, branch offices, and small- to medium-sized enterprise applications.
Option A describes the integrated and prefabricated architecture of FusionModule800 and FusionModule500. The solution family combines cooling, power infrastructure, environmental management, and intelligent monitoring. Wet-film humidification and aisle containment contribute to improved cooling efficiency. However, configuration-specific features should not be assumed to apply identically to every model.
Option B correctly identifies FusionModule800 as suitable for branch network rooms, edge data centers, and smaller enterprise environments. Its compact architecture reduces deployment complexity and minimizes the need for extensive onsite integration.
Option C describes FusionModule2000's simplified site requirements and rapid deployment characteristics. Reduced footprint, lower room-height requirements, horizontal airflow without raised floors, modular assembly, and one-click commissioning support deployment within approximately seven days rather than 30 days.
Option D cannot be accepted as a general statement because fire-extinguishing capacity must be matched to the protected volume and approved system configuration. A fire suppression module does not automatically establish adequate protection for an entire room.
Therefore, A, B, and C are the intended selections. Option C's phrase concerning high requirements on low floors should be corrected to low room-height requirements.
Huawei Training Material — Supporting Extract
Site Selection: Two "Low" and One "Free". Low footprint. Low- Room Height. Free of raised floor. Smart Modular Solution: TTM = 7 days.
FusionModule800 & 500: Integration and prefabrication. Aisle containment and wet film Humidification. Cold and hot isolation, improving cooling efficiency. 4-hour rapid deployment.
Huawei Course Reference: Introduction to Huawei Data Center Facility and Critical Power Solutions — Smart Modular DC 6.0; Simplified Site Selection and Simplified Deployment; FusionModule800 & 500 Integrated Design. PDF pages 48, 51, 54; slides 49, 52, 55.
fire/accident at Data Center A caused widespread disruption to network services, including a widely used chat application and a major e-commerce platform, with outages lasting more than 24 hours. About 32,000 servers went down, affecting the services of tens of millions of users. In response, the country's president issued a public apology for the disruption to the online platforms.
Is this statement true or false?
True
False
Option A is correct because the incident accurately reflects the major data center fire documented in Huawei's safety accident case study dated October 15, 2022.
The incident originated near lithium battery racks located in an electrical equipment room on the third basement floor of Data Center A. The facility supported major digital platforms, including communication and e-commerce services, and relied on lithium batteries for backup power.
The fire caused extensive damage to the battery installation and disrupted network services for more than 24 hours. Approximately 32,000 servers were affected, resulting in service interruptions for tens of millions of users.
The scale of the incident generated significant public and governmental concern. The country's president apologized for the disruption, while a senior official from the Ministry of Science and ICT also issued public apologies. The affected communication platform experienced additional organizational consequences.
The case illustrates the critical relationship between data center energy infrastructure and service availability. Battery reliability, electrical protection, thermal management, monitoring systems, and emergency response procedures are essential to preventing infrastructure incidents from escalating into widespread digital service outages.
Although the investigation considered battery, rack, and electrical wiring problems, a definitive ignition cause was not established in the case study.
Huawei Training Material — Supporting Extract
Consequences: Many network services, including a mainstream e-commerce platform and popular chat software, were interrupted for more than 24 hours, and 32,000 servers broke down, affecting services for tens of millions of users.
Impact: The country's president apologized to the public for the disruption to services on online platforms such as the chat software and e-commerce platform.
Huawei Course Reference: Safety Management — Safety Accident Cases 1/4: Accident in Data Center A Interrupted Many Network Services for More Than 24 Hours, and the President Publicly Apologized. PDF page 130; slide 3.
Verification assessment: Directly documented case history.
Which roles are covered under the Digital Power Partner specialist certification?
Select all that apply
Field
Sales
Presales
Marketing
Huawei's specialist certification system evaluates professional knowledge and capabilities according to defined occupational roles, technical domains, and competency levels.
Option B, Sales, is included in the Data Center Facility and Critical Power certification portfolio. This role focuses on product and solution value propositions, customer requirements, and sales-related technical knowledge.
Option C, Presales, is also included. Presales certifications address technical solution positioning, product selection, solution design, and the ability to communicate technical capabilities to customers.
Option D, Marketing, is a further designated certification role. It supports market development, customer engagement, product promotion, and the application of industry-specific marketing strategies.
All three roles appear explicitly in the HCSA V2.0 course's certification overview.
Option A, Field, does not appear in that particular course diagram. The diagram instead identifies Sales, Pre-sales, Instructor, Marketing, and Supply.
However, Huawei's broader specialist certification framework also recognizes Field as a professional certification role, including Digital Power-related qualifications.
Consequently, B, C, and D are the intended answers when the question is assessed strictly against the V2.0 training slide. The question should specify the relevant certification portfolio or version because excluding Field as a general Huawei specialist certification role is not technically accurate.
Huawei Training Material — Supporting Extract
Huawei Certified Specialist Overview: Data Center Facility & Critical Power Certification.
Sales; Pre-sales; Instructor; Marketing; Supply.
HCSA-Sales-Data Center Facility.
HCSA/P-Presales-Data Center Facility (Power).
HCSA/P-Presales-Data Center Facility (Cooling).
HCSA-Marketing-Data Center Facility.
Supplementary specialist certifications: https://partner.huawei.com/university/weben/cert/cert.html?certId=CRE2
Huawei Course Reference: Introduction to Data Center Facility Partner Policies Outside China — Huawei Certified Specialist Overview. PDF page 87; slide 7. Supplementary Huawei specialist certifications framework.
Which technologies does the Huawei FusionModule2000 use to lower PUE in a low-carbon environment?
Select all that apply
AI-based optimization, saving 8% to 15% cooling
Outdoor direct ventilation, maximizing the use of natural cooling sources
Fluorine pump refrigeration, maximizing natural cooling sources
Fully-adaptive compressor, improving low-load energy efficiency by 15%
Huawei FusionModule2000 6.0 employs three principal energy-saving technologies to improve cooling efficiency and minimize Power Usage Effectiveness (PUE): fluorine pump refrigeration, fully adaptable compressor technology, and AI-based cooling optimization.
Option A is correct because AI optimization dynamically adjusts cooling system operation according to workload and environmental conditions. Huawei identifies approximately 8% to 15% energy savings from this optimization mechanism.
Option C is correct because fluorine pump refrigeration increases the utilization of natural cooling. When the ambient temperature falls below the specified threshold, the refrigerant pump can operate without requiring the compressor, significantly reducing refrigeration energy consumption.
Option D is correct because the fully adaptable compressor improves efficiency under partial-load conditions. By adjusting compression characteristics, the system avoids unnecessary overcompression and reduces energy consumption.
Option B is not part of the three identified technologies. The specified natural cooling method relies on refrigerant pump operation rather than direct ventilation of outdoor air into the IT environment.
These technologies collectively contribute to FusionModule2000's low-PUE performance, particularly where outdoor conditions and variable IT loads provide opportunities for energy optimization.
Huawei Training Material — Supporting Extract
Green: Three Key Technologies to Achieve the Lowest PUE.
Fluorine Pump Maximizes Natural Cooling Source.
Fully adaptable compressor, improving energy efficiency by 15%.
AI optimization, energy saving by 8 to 15%.
When the temperature is below 10°C, the fluorine pump is started and the compressor is not required to operate, greatly reducing the energy consumption.
Huawei Course Reference: Introduction to Huawei Data Center Facility and Critical Power Solutions — Green: Three Key Technologies to Achieve the Lowest PUE. PDF page 50; slide 51.
In a large-scale water-cooled chilled water data center, how many key parameters is Huawei iCooling capable of sampling?
500 +
600 +
800 +
700 +
Option D corresponds to Huawei iCooling's specified capability of collecting operational information from more than 700 sampling points in a large-scale water-cooled chilled water data center.
Huawei iCooling is an AI-based cooling optimization system designed to reduce facility energy consumption by continuously monitoring operating conditions and dynamically adjusting cooling control strategies.
The system collects information from cooling infrastructure and analyzes 19+2 key parameters associated with system performance. This information supports intelligent coordination of cooling equipment, including chillers, pumps, cooling towers, and associated control systems.
Unlike conventional manual optimization, iCooling uses extensive data collection, data governance, dynamic model training, and real-time optimization to identify energy-efficient operating configurations.
Its algorithms can evaluate approximately 1.4 million original operating combinations within one minute to determine an appropriate cooling strategy.
Optimization is triggered by relevant operational changes, including variations in IT load or ambient temperature. For suitable water-cooled chilled water applications, Huawei identifies potential PUE improvements of approximately 8% to 15%.
The distinction between sampling points and key parameters is important. The figure of 700+ refers to sampling points, while 19+2 refers to key parameters. Therefore, D is the intended examination answer, although the question should use sampling points for technical accuracy.
Huawei Training Material — Supporting Extract
Huawei iCooling@AI: 700 + sampling points, (19+2) key parameters.
Training platform: HUAWEI CLOUD; local inference.
Infer the best cooling strategy from 1.4 million original combinations in 1 minute.
Optimization conditions: IT load rate change ≥ 5%; ambient temperature difference ≥ 2°C.
Huawei Course Reference: Introduction to Huawei Data Center Facility and Critical Power Solutions — AI Enables Optimization of Water Cooling Systems. PDF page 73; slide 74.
Verification assessment: Direct 700+ sampling-points specification; question miscalls sampling points key parameters.
What is the general air supply mode used by a fanwall solution?
Downstream air supply
Horizontal air supply
Upstream air supply
Huawei's high-temperature chilled water fan-wall solution uses horizontal air supply to deliver cooled air across IT equipment areas without requiring the underfloor air distribution infrastructure associated with conventional downflow cooling systems.
Option B is correct because the fan-wall architecture directs air horizontally through the equipment room, supporting efficient airflow distribution between cold and hot areas.
Conventional chilled water Computer Room Air Handling (CRAH) systems frequently use downward airflow into a raised-floor plenum. This arrangement requires additional construction, maintenance access, and floor-space planning.
Huawei's fan-wall solution eliminates the raised-floor requirement by providing horizontal, diffusing airflow directly into the equipment environment.
This design simplifies installation and reduces construction costs. Huawei identifies approximately 10% capital expenditure savings associated with the elimination of raised-floor infrastructure in the relevant comparison.
Horizontal airflow also supports high-temperature chilled water operation, allowing the cooling system to use higher inlet water temperatures and improving overall energy efficiency.
The architecture incorporates modular serviceable components and supports simplified maintenance from the return-air side of the equipment.
Option A does not describe the general fan-wall supply direction, while option C indicates an upward airflow arrangement not identified as the applicable solution architecture.
Therefore, B is the correct answer.
Huawei Training Material — Supporting Extract
No Raised Floor, Faster and Saving Deployment, Capex reduced by 10%.
Traditional In-room CW: Under floor air flow.
Huawei Fan Wall: Fan wall: no raised floor, diffusing air flow.
Fan Wall High-Efficiency Cooling: 10% ↓ Horizontal air flow. No flooring required (VS. In-room chilled water air conditioner).
Huawei Course Reference: Introduction to Huawei Data Center Facility and Critical Power Solutions — Fan Wall: High-Efficiency Cooling, Extraordinary Reliability, and Simplified O & M; No Raised Floor, Faster and Saving Deployment. PDF pages 36 and 39; slides 37 and 40.
Verification assessment: Direct horizontal airflow and no-raised-floor description.
Which are the key technologies that PowerPOD 3.0 relies on to achieve switching from normal mode to battery mode within 0 ms?
Select all that apply
Neural network algorithm scheduling technology
Hardware Clamping Patent
Independent hardware unit (hot backup unit and filter unit)
Flapping wing switch control technology
Huawei PowerPOD 3.0 incorporates specialized electrical hardware technologies that enable uninterrupted output during transitions between normal operation and battery-backed power supply.
Option B is correct because patented hardware clamping technology supports instantaneous transfer by eliminating delays normally associated with mains failure detection, inverter startup, and communication between control components.
The patented design incorporates the three-zero concept, including zero waiting, zero delay, and zero-current hot backup. These characteristics support continuity of power delivery during changes in the input supply condition.
Option C is correct because the architecture contains an independent hardware unit comprising a hot-backup unit and filtering unit. This hardware arrangement maintains transfer readiness and helps ensure reliable output when the normal supply becomes unavailable.
Option A is incorrect because neural network scheduling technology is associated with intelligent prediction and optimization rather than the fundamental instantaneous electrical transfer mechanism.
Option D references flapping-wing switching technology, which is a genuine PowerPOD 3.0 innovation. However, Huawei positions the flapping-wing load switch primarily as a high-density power distribution and footprint-saving technology, not as one of the two specific mechanisms responsible for 0 ms transfer.
Therefore, B and C correctly identify the relevant instantaneous transfer technologies.
Huawei Training Material — Supporting Extract
Independent hardware unit for 0 ms transfer.
Patented hardware clamping: “3 Zero” technologies.
Normal operation: direct power supply by the bypass, system efficiency up to 99.1%.
Mains failure: automatic transfer to double conversion mode or battery mode within 0 ms delay.
Hot backup unit independently deployed to ensure transfer reliability.
Zero Delay: There is no inverter startup delay. No communication delay.
Huawei Course Reference: Introduction to Huawei Data Center Facility and Critical Power Solutions — PowerPOD 3.0: Core Technologies, Innovative Unit with Patented Hardware Clamping. PDF page 20; slide 21.
Verification assessment: Directly supported instantaneous-transfer technologies.
What are the levels of partner specialist certification?
Select all that apply
HCSE
HCSA
HCSP
Huawei's specialist certification framework establishes three professional competency levels: Associate, Professional, and Expert.
Option B, HCSA, stands for Huawei Certified Specialist – Associate. It represents the foundation level of specialist certification and evaluates the essential knowledge and skills required for a specific professional role or technical domain.
Option C, HCSP, stands for Huawei Certified Specialist – Professional. This level evaluates more advanced capabilities and the ability to apply professional knowledge to technical, operational, or customer-facing requirements.
Option A, HCSE, stands for Huawei Certified Specialist – Expert. It represents the highest of the three specialist certification levels and evaluates advanced expertise associated with complex responsibilities and professional scenarios.
The three levels form a structured progression through which individuals can develop and demonstrate professional competence.
Huawei's specialist certification system also distinguishes the competency level from the occupational role and technical domain. For example, Sales, Presales, Marketing, and Field certifications may exist within particular technology domains.
The HCSA V2.0 course displays associate-level and expert-level certifications within its Data Center Facility and Critical Power portfolio. Huawei's official specialist certification framework confirms the complete Associate–Professional–Expert hierarchy.
Therefore, all three options are correct.
Huawei Training Material — Supporting Extract
Data Center Facility & Critical Power Certification: HCSA-Sales-Data Center Facility.
HCSA/P-Presales-Data Center Facility (Power).
HCSA/P-Presales-Data Center Facility (Cooling).
HCSA/P-Presales-Data Center Facility (Modular DC).
HCSE-Presales-Data Center Facility.
The HCSA slide provides these examples but does not expand HCSP; supplementary official certification framework: https://partner.huawei.com/university/weben/cert/cert.html?certId=CRE2
Huawei Course Reference: Introduction to Data Center Facility Partner Policies Outside China — Huawei Certified Specialist Overview. PDF page 87; slide 7. Supplementary Huawei specialist certifications framework.
Which of the following statements about the grace period management rules for sales partner certification are correct?
Select all that apply
Grace period for new/upgraded certification:If the capability does not meet the requirements temporarily, the grace period cannot be applied for.
Review the capabilities on the second day after the grace period ends. If the certification threshold is not reached, the certification will be downgraded.
Expiration date of the grace period: not more than 6 months and not more than March 1 of the following year.
Grace period for renewing the certification:The entry requirements for the performance threshold for certification level must be met.
Grace period for new/upgraded certifications:Meet the performance threshold requirements of the corresponding level, or the admission requirements of partners at the same level or higher in the industry.
Huawei's sales partner certification process evaluates both business performance and organizational capabilities to determine the appropriate partner certification level.
Grace-period management provides a controlled mechanism for addressing temporary gaps in certification requirements while retaining defined eligibility conditions and a deadline for completing the necessary improvements.
Option C describes a maximum grace period of six months, subject to an additional expiration limit of March 1 of the following year. Such restrictions prevent certification exceptions from continuing indefinitely.
Option D establishes that certification renewal remains subject to the applicable performance threshold. A grace period should not be interpreted as eliminating the fundamental performance criteria required for the corresponding certification level.
Option E describes performance-related admission conditions for new or upgraded certifications, including qualification against the applicable level or relevant industry partner admission standards.
Option A is inconsistent with the purpose of capability-related grace arrangements because it categorically excludes a temporary capability gap as a basis for an application.
Option B proposes an exact review date and automatic downgrade rule. The course confirms that partners who fail applicable certification requirements may be downgraded, but it does not establish the specific second-day review procedure.
Consequently, C, D, and E are the intended choices. The detailed dates, eligibility conditions, and review procedures must be confirmed against the governing certification grace-period rules.
Huawei Training Material — Supporting Extract
New certification: For sales partners who have not been certified in the past or who have been certified by Huawei but have not renewed their certification in 2024, their performance and capabilities in 2024 must meet the certification requirements of the corresponding level in 2024 when applying for certification.
Upgrading: Partners can apply for certification upgrade if they meet higher-level certification requirements in 2024.
Downgrading: If partners cannot meet the requirements of the identity, the sales partners will be downgraded.
New certifications, upgrading and downgrading are subject to the Grace Rules for Sales Partner Certification.
Huawei Course Reference: Introduction to Data Center Facility Partner Policies Outside China — Registration and Administration Requirements: New Certification, Certification Renewal, Upgrading and Downgrading. PDF page 84; slide 4.
Within the Digital Power BU global partner policy framework, which of the following are considered part of the partner policies?
Select all that apply
Partner operation policies
Capability development policies
Partner development policies
Partner registration policies
Incentive and support policies
Partner policy outline
Huawei's Digital Power partner management framework addresses the full cooperation lifecycle, beginning with partner identification and registration and extending through business operations, capability enhancement, performance management, and incentive administration.
Option A corresponds to partner operation policies, which govern routine business activities, reporting accuracy, channel transactions, and operational compliance.
Option B addresses capability development policies. Huawei evaluates partner capabilities across sales, technical support, marketing, operations, and organizational management, with the objective of improving long-term business performance.
Option C covers partner development policies, including ecosystem development, partner progression, certification, and the establishment of sustainable business relationships.
Option D corresponds to partner registration policies, which specify legal eligibility, registration procedures, agreement execution, authorization, and renewal requirements.
Option E addresses incentives and support, including rebates, marketing funding, demonstration equipment support, and measures intended to strengthen partner capability and market development.
Option F is more naturally interpreted as an overview or introductory description of the policy system rather than a distinct operational policy category.
The intended five selections are therefore A through E. However, the HCSA V2.0 course organizes its content by partner positioning, registration, capability, incentives, and routine management without explicitly reproducing this six-option classification as a formal five-part policy framework.
Huawei Training Material — Supporting Extract
Course Objectives: Understand the channel Framework of Data Center Facility & Critical Power sales partners. Understand the basic positioning of Data Center Facility & Critical Power partners. Understand the certification standards and capability requirements for Data Center Facility & Critical Power partners. Understand the incentive types and basic concepts of Data Center Facility & Critical Power partners.
Incentive Briefing: Encourage partners to achieve their performance and cultivate core partners. Encourage partners to invest more, improve capabilities, and enhance cooperation stickiness. Influence partners' key behaviors and strengthen the process management of partner development. Develop partners and build a partner ecosystem.
Huawei Course Reference: Introduction to Data Center Facility Partner Policies Outside China — Course Objectives; Registration and Administration Requirements; Partner Capability; Incentive Briefing; Routine Management. PDF pages 81, 84, 86, 88 and 91; slides 1, 4, 6, 8 and 11.
In the intelligent computing era, the IT power density of data centers is increasing.
True
False
The rapid development of artificial intelligence, large language models, and high-performance computing is driving substantial increases in the electrical power density of modern data centers.
AI computing platforms require high-performance processors, accelerators, memory systems, and high-bandwidth interconnection infrastructure. These technologies concentrate greater computing capacity and electrical demand within individual equipment racks.
Huawei identifies the progression from traditional rack power densities of approximately 6–8 kW to higher-density configurations of 12–16 kW and, subsequently, 30 kW or more per rack.
This increase has major implications for data center facility architecture. Power distribution systems must support greater electrical loads, while cooling infrastructure must remove significantly higher heat densities without compromising equipment operating conditions.
Higher-density deployments also increase the importance of power system efficiency, modular scalability, intelligent cooling control, and optimized use of equipment-room space.
Huawei's PowerPOD, FusionCol, and prefabricated modular data center solutions address these requirements through high-density power conversion, efficient cooling, and simplified infrastructure deployment.
The trend is therefore not limited to increasing total data center energy consumption; it also involves concentrating more electrical power within each rack and reducing the space required per unit of computing capacity.
Option A correctly describes this fundamental industry trend.
Huawei Training Material — Supporting Extract
Development of AI drives DCs to High Power Density and Fast Service Rollout.
Data centers are moving towards high density and flexible deployment.
Power density is continuously increasing.
6-8 kW/Rack; 12-16 kW/Rack; 30+ kW/Rack.
Huawei Course Reference: Introduction to Huawei Data Center Facility and Critical Power Solutions — Data Center Industry Trends: Development of AI Drives DCs to High Power Density and Fast Service Rollout. PDF page 5; slide 6.
Verification assessment: Directly verified AI-driven increase in rack power density.
Huawei DCIM's digital visualization capability enables visualization at which of the following levels?
Select all that apply
Device level
Module level
Equipment room level
Power distribution and cooling links
Huawei Data Center Infrastructure Management (DCIM), represented by the NetEco6000 platform, provides digital visualization capabilities for monitoring facility infrastructure at multiple organizational and technical levels.
Option A is correct because device-level monitoring enables operators to examine the operating conditions, measurements, and alarms associated with power distribution equipment, UPS systems, cooling units, and other monitored assets.
Option B is correct because module-level visualization supports monitoring of modular data center infrastructure, including integrated equipment groups and their operational status.
Option C is correct because equipment room visualization provides a broader view of infrastructure layout, environmental conditions, resource utilization, and associated facility equipment. Three-dimensional monitoring helps operators understand the physical location and operational context of equipment.
Option D is correct because power distribution and cooling-link visualization provides visibility into infrastructure dependencies and system operating conditions. These functions support fault localization and help maintenance teams understand how power and cooling services reach critical IT loads.
Together, these capabilities support centralized monitoring, intelligent maintenance, capacity planning, and energy efficiency optimization.
The result is a management platform capable of presenting both individual device conditions and larger infrastructure relationships. All four options represent supported visualization capabilities within Huawei's DCIM solution.
Huawei Training Material — Supporting Extract
Digitization & visualization: Hyperscale, Supports 3 millions of monitor points access— > 1.5 thousands of racks.
3D monitor view of data center.
Power Distribution device; Cooling Device; FusionModule; Video & Access Device; Data Connector; Smoke Temperature & Humidity; Pressure.
Supplementary product documentation: https://digitalpower.huawei.com/en/data-center-facility/neteco6000
Huawei Course Reference: Huawei DCF Energy Management System Product Panorama — Digitization and Visualization. PDF page 71; slide 72. Supplementary Huawei NetEco6000 feature documentation.
Verification assessment: Course overview and Huawei NetEco product documentation support four visualization levels.
When an Energy Storage System (ESS) fire alarm activates but only smoke — not flame — is being emitted, which of the following is the correct response action?
Open the cabinet door, check the point of origin inside, and use a fire extinguisher to put out the fire.
Keep observing the situation remotely. Do not spray water into it for the time being, and pour water onto its surface to cool the temperature. Spray water into it after seeing open flame.
Open the valve for the water sprinkler pipe and start the water pump to inject water into the faulty ESS.
Approach the ESS to measure its temperature with your hand.
Smoke emission from an Energy Storage System (ESS) indicates a potentially hazardous battery condition involving overheating, internal electrical faults, or the initial development of thermal runaway. Immediate response must prioritize personnel safety, remote observation, and controlled emergency procedures.
Option B is the closest answer because it emphasizes maintaining remote observation and avoiding the immediate introduction of water into an ESS emitting smoke without visible flames.
However, personnel must not interpret this option as authorization to approach a smoking cabinet to apply water externally. Huawei's fire safety requirements explicitly prohibit approaching a smoking ESS to spray water because electrical faults and sparks may ignite combustible gases accumulated inside the enclosure.
The appropriate initial response involves evacuating personnel, raising emergency alarms, maintaining a safe distance, and remotely isolating the equipment where possible.
If visible fire develops, appropriately equipped emergency responders should implement the approved fire-extinguishing and cooling procedures in accordance with local fire authority requirements and site conditions.
Option A is unsafe because opening the enclosure may introduce oxygen and increase explosion risk. Option C describes an intervention that is not appropriate as an automatic initial response to smoke alone. Option D exposes personnel directly to thermal, electrical, and explosion hazards.
Huawei Training Material — Supporting Extract
Fire Handling Process: Quickly evacuate personnel. Call the fire department. Try to remotely shut down the equipment. Continuously monitor the equipment in a safe area. Take personal protection measures. Precautions for Handling Fire: Do not approach an ESS that emits smoke and spray water on it; combustible gas accumulation and electrical sparks may cause explosion. The specific fire handling process must be formulated according to local fire department requirements and onsite conditions.
Huawei Course Reference: Safety Management — Fire Handling Process; Precautions for Handling Fire. PDF pages 183–184; slides 56–57.
TESTED 21 Nov 2026
Copyright © 2014-2026 DumpsTool. All Rights Reserved