H13-624_V5.5 Questions and Answers

The HyperSnap feature in Huawei flash storage systems, such as OceanStor Dorado, enables point-in-time snapshots for data protection. The *HCIP-Storage V5.5 Training Material (Module 2: Flash Storage Technologies)* states: “To create snapshots using HyperSnap, the storage pool containing the source LUNs must have sufficient available capacity to store snapshot metadata and copy-on-write (COW) data. If the storage pool lacks free space, snapshot creation for a protection group will fail.” This aligns with the question’s statement that a lack of available capacity in the storage pool prevents snapshot creation for a protection group, making the statement true. The material emphasizes that capacity issues are a common cause of snapshot failures, as snapshots require additional space for incremental changes.

Disk replacement in Huawei OceanStor Pacific 9950 is covered in the *HCIP-Storage V5.5 Training Material (Module 5: Storage System Maintenance and Troubleshooting)*: “SmartKit guides disk replacement, requiring engineers to complete pre-processing steps, such as isolating the faulty disk and verifying redundancy, before proceeding with removal and installation.” Let’s evaluate:

- Option A: Incorrect. The material does not specify a 60-second wait after disconnecting the disk; it emphasizes immediate removal after pre-processing.

- Option B: Correct. The material confirms that SmartKit prompts for pre-processing (e.g., disabling the disk) before replacement.

- Option C: Incorrect. There is no 10-minute limit for heat dissipation concerns; the focus is on quick replacement to minimize reconstruction time.

- Option D: Incorrect. No specific 10-second interval is required to prevent disk damage; the material advises prompt insertion after removal.

Thus, option B is true.

The *HCIP-Storage V5.5 Training Material (Module 5: Storage System Maintenance and Troubleshooting)* outlines troubleshooting principles: “Basic troubleshooting principles include prioritizing high-severity alarms, analyzing external factors (e.g., network or host issues) before internal storage issues, and addressing network alarms before network element (NE) alarms to rule out connectivity issues.” Let’s evaluate:

- Option A: Correct principle. Network alarms are analyzed first to exclude external connectivity issues.

- Option B: Not a principle. The material does not prioritize general alarms over specific ones; it focuses on severity and context.

- Option C: Correct principle. Higher-severity alarms are addressed first to mitigate critical issues.

- Option D: Correct principle. External factors are checked before internal storage issues.

Thus, option B is not a basic troubleshooting principle.

The *HCIP-Storage V5.5 Training Material (Module 5: Storage System Maintenance and Troubleshooting)* addresses host-side performance issues: “Outdated HBA drivers or insufficient concurrent HBAs can cause high host latency. Upgrading the HBA driver to the latest version ensures compatibility and performance. Adjusting the multipathing software’s load balancing algorithm to min-task optimizes I/O distribution across paths, reducing latency.” Let’s evaluate:

- Option A: Incorrect. HBA vendor software may query settings, but modifying concurrent HBAs is typically a firmware or driver-level task, not a standard management software function.

- Option B: Correct. Upgrading the HBA driver resolves compatibility and performance issues.

- Option C: Correct. The min-task algorithm balances I/O to minimize queuing delays.

- Option D: Incorrect. Cache prefetch policies affect storage-side performance, not host-side latency caused by HBA issues.

Thus, options B and C are the correct measures.

Storage performance metrics are covered in the *HCIP-Storage V5.5 Training Material (Module 5: Storage System Maintenance and Troubleshooting)*: “For large I/O sizes (≥64 KB), throughput is the primary performance indicator, as it measures the data transfer rate, critical for applications like video streaming or large file transfers.” Throughput, measured in MB/s or GB/s, reflects the system’s ability to handle large data volumes, making it the key concern for such scenarios.

The integrated I/O stack in Huawei flash storage systems, such as OceanStor Dorado, is divided into layers, with the space management layer handling metadata and resource allocation. The *HCIP-Storage V5.5 Training Material (Module 5: Storage System Maintenance and Troubleshooting)* states: “The space management layer is responsible for metadata operations and space allocation. Key performance concerns include the cache hit ratio of hot metadata, which affects access speed, and CPU usage for background metadata management tasks, which impacts system efficiency.” Let’s evaluate:

- Option A: Correct. The material confirms that the cache hit ratio for hot metadata is critical for reducing latency in the space management layer.

- Option B: Correct. High CPU usage in metadata management can bottleneck performance, as noted in the material.

- Option C: Incorrect. Failover for protocol receiving threads is a concern for the data service layer, not the space management layer.

- Option D: Incorrect. The prefetch algorithm’s hit ratio is relevant to the data service layer, not space management.

Thus, options A and B are the performance concerns.

The question focuses on the running statuses of remote replication pairs in Huawei’s flash storage systems, such as OceanStor Dorado. The *HCIP-Storage V5.5 Training Material (Module 4: Storage Design and Implementation)* details the remote replication feature and its statuses. The material states: “When the pair running status is ‘Normal,’ the remote replication pair is fully synchronized, meaning data between the primary and secondary LUNs is consistent, and synchronization is complete.” This matches option C.

- Option A: Incorrect. The training material indicates that if a pair is deleted from one site, causing inconsistency, the status may not necessarily change to “To be recovered.” Instead, it may require manual intervention or reconfiguration, and “To be recovered” is typically associated with link failures or incomplete synchronization, not deletion.

- Option B: Incorrect. The “Split” status occurs when the pair relationship is interrupted, but it can be due to manual intervention or automatic triggers (e.g., link failure). The parenthetical “not manually” is misleading, as the material does not restrict “Split” to non-manual causes.

- Option D: Incorrect. The “To be synchronized” status indicates that the pair is preparing for synchronization but is not yet consistent. There is no requirement to manually disconnect the pair for single LUN service needs, as the system can operate with the primary LUN independently during this state.

Thus, option C is the only accurate statement based on official documentation.

The *HCIP-Storage V5.5 Training Material (Module 5: Storage System Maintenance and Troubleshooting)* confirms: “The CLI command ‘show license_active’ is used to query details of activated licenses on Huawei flash storage systems, including license status and features enabled.” This makes the statement true, as the command is a standard tool for license management.

The OceanStor Pacific series employs data reconstruction to recover from node or disk failures. The *HCIP-Storage V5.5 Training Material (Module 3: Scale-Out Storage Technologies)* states: “In OceanStor Pacific, data reconstruction for a faulty disk or node begins automatically based on system policies, but the default delay is not fixed at 15 minutes. The reconstruction start time depends on configurable parameters, such as the system’s fault detection and stabilization period, typically ranging from immediate to several minutes, adjusted via DeviceManager.” The specific claim of a 15-minute delay is not mentioned in the official documentation, and reconstruction timing is flexible, making the statement false.

The Huawei Ocean Protect Appliance leverages CPU core grouping and intelligent scheduling to optimize performance, as described in the *HCIP-Storage V5.5 Training Material (Module 2: Flash Storage Technologies)*. The material states: “CPU core grouping and intelligent scheduling in Ocean Protect appliances enable physical and logical isolation of resources, ensuring that specific cores are dedicated to specific tasks. This isolation reduces contention and minimizes latency for critical operations.” This directly supports option C, as the technology’s primary advantage is reducing latency through resource isolation.

- Option A: Incorrect. While load balancing is a feature of some Huawei storage systems, the training material does not specify that CPU core grouping and intelligent scheduling in Ocean Protect appliances focus on distributing jobs for load balancing. Instead, it emphasizes resource isolation.

- Option B: Incorrect. The material indicates that this technology prevents core overload by isolating tasks, avoiding high latency, making this statement false.

- Option D: Incorrect. Prefetching data and metadata to improve cache hit ratios is unrelated to CPU core grouping and scheduling, which focus on processor resource management, not cache operations.

Thus, option C is the correct advantage of this technology.

Fibre Channel (FC) link exceptions in Huawei OceanStor Dorado 18000 systems are addressed in the *HCIP-Storage V5.5 Training Material (Module 5: Storage System Maintenance and Troubleshooting)*: “Common causes of FC link exceptions include mismatched port rates between the host and switch, poorly connected or faulty optical fibers, and mismatched optical module rates between host and storage front-end ports.” Let’s evaluate:

- Option A: Correct. Mismatched FC port rates between the host and switch cause link failures.

- Option B: Correct. Faulty or loose optical fibers disrupt FC connectivity.

- Option C: Correct. Mismatched optical module rates between host and storage ports lead to link exceptions.

- Option D: Incorrect. IP address settings are relevant to iSCSI, not FC, which uses physical connections.

Thus, options A, B, and C are possible causes.

The *HCIP-Storage V5.5 Training Material (Module 5: Storage System Maintenance and Troubleshooting)* covers power management:

- Option A: True. “Correct expansion cable connections are required before power-on to ensure proper operation.”

- Option B: True. “The BMC system allows powering on controller enclosures via the external management IP when none are powered on.”

- Option C: False. “After an emergency power-off, the storage system is powered on via DeviceManager, CLI, or BMC, not by pressing the controller enclosure’s power button, which is used for normal power-on.”

- Option D: True. “In OceanStor Dorado 8000, powering on a controller enclosure automatically powers on cascaded disk enclosures.”

Thus, option C is false.

The SmartMigration feature in Huawei OceanStor Dorado enables seamless data migration between LUNs, as detailed in the *HCIP-Storage V5.5 Training Material (Module 4: Storage Design and Implementation)*. Let’s analyze each option:

- Option A: True. The material states: “SmartMigration between heterogeneous storage systems relies on SmartVirtualization to take over the source LUN, ensuring compatibility and seamless migration.”

- Option B: True. The material confirms: “The target LUN capacity must be greater than or equal to the source LUN capacity to accommodate all data during migration.”

- Option C: True. The material notes: “A LUN already mapped to an application server cannot be used as the target LUN for SmartMigration, as it would disrupt existing mappings.”

- Option D: False. The material explains: “The migration rate affects system resources. Setting the highest migration rate under heavy host service load can degrade performance due to resource contention. The rate should be adjusted based on load to minimize impact.” This makes the statement false, as high migration rates are not recommended during heavy loads.

Thus, option D is false.