Activate Your Black Friday Offer: 75% Discount on Exam Bundles! Use coupon code below! - Ends in 0d 00h 00m 00s - Coupon code: 75onlydt

HPE7-A10 Questions and Answers

Question # 6

A client connected to an AOS-CX switch has been assigned Role1. Role1 has the following port-access classes and policy associated with it:

```text

class ip class1

10 match tcp any any eq 22

20 ignore tcp any 10.10.4.0/23 eq 443

30 match ip any 10.10.4.0/23

class ip class2

10 match any any eq 67

20 match ip any 10.10.4.0/22

port-access policy policy1

10 class ip class1 action drop

20 class ip class2

```

The client sends two packets:

1: HTTPS to 10.10.5.5

2: DNS to 10.10.6.6

What occurs?

A.

The first packet is denied, and the second packet is permitted.

B.

The first packet is permitted, and the second packet is denied.

C.

Both packets are denied.

D.

Both packets are permitted.

Full Access
Question # 7

An HPE Aruba Networking Mobility Controller is configured with the following commands:

`aaa rfc-3576-server 10.1.2.3 key mysecretkey & ^%!7531 replay-protection window-duration 300`

Later, this output is displayed:

`(host)#show aaa rfc-3576-server statistics`

`RADIUS RFC 3576 Statistics - 10.1.2.3`

`Disconnect Requests: 2534 | Disconnect Accepts: 2534 | Disconnect Rejects: 0`

`No Secret: 0 | No Session ID: 0 | Bad Authenticator: 0 | Invalid Request: 0`

`Packets Dropped: 1431 | Unknown service: 0`

`CoA Requests: 2453 | CoA Accepts: 1022 | CoA Rejects: 0 | No permission: 0`

What should be investigated?

A.

Why so many packets are being dropped, which could be a sign that hackers are capturing and resending CoAs for their own purposes

B.

Whether an unstable network is disrupting communications between the MC and 10.1.2.3

C.

Whether the server sending the CoAs has been configured with the wrong RADIUS secret or whether this is a sign that someone is spoofing messages

D.

Why the 10.1.2.3 server is sending legacy packets that are no longer supported

Full Access
Question # 8

Refer to the exhibit.

Question # 8

Frame 421: 50:81:40:9f:2b:25 - > Broadcast ARP 60 10.1.26.1 is at 50:81:40:9f:2b:25 (duplicate use of 10.1.26.1 detected!)

Frame 422: 50:81:40:9f:2b:25 - > Broadcast ARP 60 10.1.26.1 is at 50:81:40:9f:2b:25 (duplicate use of 10.1.26.1 detected!)

Frame 424: 50:81:40:9f:2b:25 - > Broadcast ARP 60 10.1.26.1 is at 50:81:40:9f:2b:25 (duplicate use of 10.1.26.1 detected!)

Which device should be documented as potentially malicious and requiring further investigation?

A.

10.1.26.1

B.

50:81:40:9f:2b:25

C.

10.1.26.152

D.

fe80::9927:5869:add

Full Access
Question # 9

A customer has an AOS-10 architecture that includes HPE Aruba Networking APs. The customer recently enabled WIDS at the high level on the APs. Administrators see several "ad hoc using valid SSID" events.

What should you explain?

A.

A hacker could be trying to launch a man-in-the-middle or DoS attack. You will start tracking down the source of the events immediately.

B.

Domain GPOs have likely misconfigured clients. You will meet with the domain admins to work out the issue.

C.

The WIDS solution is likely malfunctioning, causing APs to detect each other as threats. You will check the configuration immediately.

D.

Faulty client drivers often cause this event. You will look out for other events, but the customer should not worry.

Full Access
Question # 10

A company wants its AOS-CX switches to obtain certificates from ClearPass Onboard and use those certificates to implement RadSec with ClearPass Policy Manager (CPPM).

ClearPass Onboard has a CA with EST enabled and this EST URL: `[https://cp1.acnsxtest.com/.well-known/est/ca:2](https://cp1.acnsxtest.com/.well-known/est/ca:2)`

ClearPass Guest has an account whose username is `switchcorp123`. (Assume CPPM also has a valid service to authenticate users who access the EST application.)

CPPM has a network-device account for the switches with RadSec enabled. The RadSec settings validate by CN or SAN using this regex: `switchcorp123`

ClearPass has these certificates:

* HTTPS certificate signed by DigiCert

* RadSec certificate signed by DigiCert

* RADIUS/EAP certificate signed by MyDomainCA

This configuration is on the AOS-CX switches:

```text

crypto pki est-profile est1

url https://clearpass1.acnsxtest.com/.well-known/est/ca:2

username switchcorp123

password plaintext %FY212h & zaTk

vrf default

exit

crypto pki certificate cert1

subject switchcorp123

enroll est-profile onboard

crypto pki application radsec-client certificate cert1

```

The switches’ TA-profile list includes DigiCert.

Assume you have obtained the correct password associated with the indicated username. What error or errors are present?

A.

The URL in the EST profile is incorrect, and the switch does not trust a necessary CA.

B.

Only the username in the EST profile is incorrect.

C.

Only the URL in the EST profile is incorrect.

D.

The URL in the EST profile is incorrect, and the common name in the EST profile is incorrect.

Full Access
Question # 11

Refer to the exhibit.

Field: Subject

Value: .acnsxtest.com, ACNSX Test...

Field: Subject Alternative Name

Value: DNS Name=.acnsxtest.com

Field: Enhanced Key Usage

Value: Server Authentication (1.3.6.1.5.5.7.3.1)

You have received this certificate to install on an HPE Aruba Networking ClearPass server for RADIUS/EAP and RadSec use. What is one issue?

Question # 11

A.

The certificate does not have a URI subject alternative name (SAN).

B.

The certificate has a wildcard in the subject common name.

C.

The certificate uses a fully qualified the ".local" domain name.

D.

The certificate does not have an IP subject alternative name (SAN).

Full Access
Question # 12

You are helping a developer create a custom NAE script for an AOS-CX switch. What information might you need to provide so the developer can define the parameters correctly?

A.

a list of complex actions that include multiple smaller actions

B.

values that might need to be adjusted on a per-agent basis

C.

tags to identify the script in HPE Aruba Networking Solution Exchange

D.

limitations on the number of NAE components that a switch can support

Full Access
Question # 13

A customer uses an AOS-10 architecture managed by HPE Aruba Networking Central. HPE Aruba Networking infrastructure devices authenticate clients to an HPE Aruba Networking ClearPass cluster.

In HPE Aruba Networking Central, you are reviewing network traffic flows for a wireless IoT device categorized as "Raspberry Pi" clients. You observe SSH traffic. You then examine several additional wireless IoT clients and find that they are also sending SSH.

Refer to the scenario.

You need a fast way to find a list of all IoT clients that have used SSH.

What step can you take?

A.

Run a search for SSH traffic and IoT client IDs in HPE Aruba Networking ClearPass Policy Manager's (CPPM’s) accounting information.

B.

Use HPE Aruba Networking Central's Live Events monitoring tool to detect which clients meet the desired criteria.

C.

Create and apply an HPE Aruba Networking Central client profile tag that selects the SSH application and the clients' category.

D.

Use HPE Aruba Networking Central's Gateway IDS/IPS Security Dashboard to search for SSH events and sources.

Full Access
Question # 14

How does HPE Aruba Networking Central secure site-to-site connections between AOS-10 gateways?

A.

It uses an HPE Aruba Networking proprietary integrity and encryption technologies to secure site-to-site connections, making them resistant to zero day attacks.

B.

It automatically establishes IPsec tunnels for all site-to-site (all HUBs and Branches) connections using keys securely distributed by HPE Aruba Networking Central.

C.

It automatically steers traffic away from Internet-based connections to more secure MPLS connections to reduce encryption overhead.

D.

It automatically establishes simple-to-manage and highly secure TLSv1.3 tunnels between gateways.

Full Access
Question # 15

A customer operates an HPE Aruba Networking ClearPass cluster. The customer has AOS-CX switches that use 802.1X authentication with HPE Aruba Networking ClearPass Policy Manager (CPPM).

The switches use local port-access policies. The customer wants to begin tunneling wired clients that pass only user authentication to an HPE Aruba Networking gateway cluster. The gateway cluster must assign these clients the eth-internet role. The gateway must also assign the clients to VLAN 20.

The intended enforcement policy and profiles are shown below:

* Policy: `written-exam-3`

* Profile: `written-exam-b`

The gateway cluster contains two gateways with the following IP addresses:

Gateway 1: VLAN 4085 (system IP) = 10.20.4.21 | VLAN 20 (users) = 10.20.20.1 | VLAN 4094 (WAN) = 198.51.100.14

Gateway 2: VLAN 4085 (system IP) = 10.20.4.22 | VLAN 20 (users) = 10.20.20.2 | VLAN 4094 (WAN) = 198.51.100.12 | VRRP on VLAN 20 = 10.20.20.254

The customer needs high availability for tunnels between the switches and the gateway cluster. If one gateway fails, the other gateway must take over its tunnels. The switch must also be able to discover the gateway cluster even if one gateway in the cluster is unavailable.

Refer to the scenario. Assume that `myzone` is the name used for the UBT zone.

Question # 15

Question # 15

Which option is a valid minimal configuration for the AOS-CX port-access roles?

A.

`port-access role internet-only gateway-zone zone myzone gateway-role eth-internet vlan access 20`

B.

`port-access role internet-only gateway-zone zone myzone gateway-role eth-internet`

C.

`port-access role eth-internet gateway-zone zone myzone gateway-role eth-internet vlan access 20`

D.

`port-access role eth-internet gateway-zone zone myzone gateway-role eth-user`

Full Access
Question # 16

An organization wants an AOS-CX switch to trigger an alert when its RADIUS server (cp.acnsxtest.local) rejects an unusual number of client authentication requests each hour. After discussions with other HPE Aruba Networking administrators, you still do not know how many rejections are normal or unusual. You expect the value might differ on every switch.

You are helping the developer understand how to create an NAE script for this use case.

Question # 16

Refer to the scenario.

The developer explains that they intend to define the rule with logic like this: `monitor > value`

However, the developer asks what value to include.

What should you recommend?

A.

Checking one of the access switches’ RADIUS statistics and adding 10 to the number listed for rejects

B.

Defining a parameter and referring to it (self.params[name]) for the value

C.

Defining a baseline and referring to it for the value

D.

Using 10 (per hour) as a good starting point for the value

Full Access
Question # 17

A financial institution must authenticate managers of HPE Aruba Networking Mobility Controllers (MCs) and HPE Aruba Networking Mobility Conductors through ClearPass Policy Manager (CPPM). The institution’s security policies require strong encryption for manager-authentication communications between the HPE Aruba Networking devices and CPPM.

What is a valid solution?

A.

TACACS+ inside an IPsec tunnel

B.

TACACS+ on its own

C.

LDAP using TLS security

D.

RADIUS on its own

Full Access
Question # 18

You want to use HPE Aruba Networking ClearPass Device Insight tags as conditions in CPPM role-mapping or enforcement-policy rules.

Which guidelines should you follow?

A.

Create an HTTP authentication source to the HPE Aruba Networking Central API that queries for the tags. To use that source as the type for rule conditions, add it an authorization source for the service in question.

B.

Use the Application type for the rule conditions; no extra authorization source is required for services that use policies with these rules.

C.

Use the Endpoints Repository type for the rule conditions; Add Endpoints Repository as a secondary authentication source for services that use policies with these rules.

D.

Use the Endpoint type for the rule conditions; no extra authorization source is required for services that use policies with these rules.

Full Access
Question # 19

Introduction to the customer

You are assisting a company with adding HPE Aruba Networking ClearPass to its network, which uses HPE Aruba Networking infrastructure devices.

The company already has a Windows domain and Windows CA. The Windows CA issues certificates to domain computers, domain users, and servers such as domain controllers.

ClearPass cluster IP addressing and hostnames

A customer's ClearPass cluster uses these IP addresses:

Publisher = 10.47.47.5

Subscriber 1 = 10.47.47.6

Subscriber 2 = 10.47.47.7

Virtual IP with Subscriber 1 and Subscriber 2 = 10.47.47.8

The customer's DNS server contains these entries:

cp.acnsxtest.com = 10.47.47.5

cps1.acnsxtest.com = 10.47.47.6

cps2.acnsxtest.com = 10.47.47.7

radius.acnsxtest.com = 10.47.47.8

onboard.acnsxtest.com = 10.47.47.8

Refer to the scenario.

The Onboard CA uses the settings shown in the exhibits below.

* CA Name: Onboard CA, CA ID: 2

* Common Name: ClearPass Intune Certificate Authority

Microsoft Entra ID (Azure AD) administrators need assistance configuring the app registration for integration with ClearPass Onboard.

Question # 19

Question # 19

Question # 19

Question # 19

Which URL should you tell them to use?

A.

`[https://clearpass.acnsxtest.com/.well-known/est/ca:2](https://clearpass.acnsxtest.com/.well-known/est/ca:2)`

B.

`[https://onboard.acnsxtest.com/onboard/mdps_scep.php/2](https://onboard.acnsxtest.com/onboard/mdps_scep.php/2)`

C.

`[https://cps1.acnsxtest.com/.well-known/est/ca:2](https://cps1.acnsxtest.com/.well-known/est/ca:2)`

D.

`[https://localhost.acnsxtest.com/onboard/mdps_scep.php/2](https://localhost.acnsxtest.com/onboard/mdps_scep.php/2)`

Full Access
Question # 20

A company uses an HPE Aruba Networking EdgeConnect SD-Branch solution. The customer wants to integrate the solution with HPE Aruba Networking SSE.

What is one step that must be completed in HPE Aruba Networking SSE and is not automated as part of the typical setup?

A.

Defining rules for applying SSL inspection to branch user traffic

B.

Creating locations for branches

C.

Choosing whether to enforce IPsec SLAs

D.

Selecting which EdgeConnect SD-Branch gateways establish tunnels with HPE Aruba Networking SSE

Full Access
Question # 21

Introduction to the customer

You are assisting a company with adding HPE Aruba Networking ClearPass to its network, which uses HPE Aruba Networking network-infrastructure devices.

The company already has a Windows domain and Windows CA. The Windows CA issues certificates to domain computers, domain users, and servers such as domain controllers.

ClearPass cluster IP addressing and hostnames

Publisher = 10.47.47.5

Subscriber 1 = 10.47.47.6

Subscriber 2 = 10.47.47.7

Virtual IP with Subscriber 1 and Subscriber 2 = 10.47.47.8

Refer to the scenario.

You created a role-mapping policy as displayed in the exhibits below.

Question # 21

Policy Name: written-exam

Rules Evaluation Algorithm: First applicable

Conditions:

1. (Certificate:Issuer-CN EQUALS ClearPass Intune Certificate Authority (Signing))

2. (Authorization:UniversityAD:Groups EQUALS_IGNORE_CASE Medical)

3. (Authorization:UniversityAD:Groups EQUALS_IGNORE_CASE Reception)

4. (Authentication:TEAP-Method-1-Status EQUALS Success)

What one change must you make to this policy?

A.

Move rule 1 to the bottom of the list.

B.

Change the default role to "mobile-onboarded".

C.

In rule 1 change Issuer-CN to Subject-CN.

D.

Change the rules evaluation algorithm to select all matches.

Full Access
Question # 22

A hospital has an AOS-10 architecture managed by HPE Aruba Networking Central. The customer has deployed a pair of HPE Aruba Networking 9000 Series gateways with Security licenses at each clinic. The gateways implement IDS/IPS in IDS mode.

The Security Dashboard shows several recent events with the same signature, as shown below:

Question # 22

Occurred On: 2023-01-12 | Gateway: gw2 | Type: DNS | Source: 10.1.36.152 | Destination: 10.254.1.21 | Action: allowed | Description: DNS Query for TOR Hidden...

Refer to the scenario.

You have learned that nurse call stations are the source of the events. What can you conclude?

A.

These devices are unlikely to use TOR legitimately, but malware often does. You and the security team should investigate these stations.

B.

This event is a common false positive for clients using video streaming, but you should still investigate it further to comply with best practices.

C.

The nurses are making their devices vulnerable by contacting unsafe websites. You should educate them about safe browsing practices.

D.

The threat destination has an internal IP address, and it is likely a DNS server. You should verify that this server is patched and uncompromised.

Full Access