Activate Your Black Friday Offer: 75% Discount on Exam Bundles! Use coupon code below! - Ends in 0d 00h 00m 00s - Coupon code: 75onlydt

L6M8 Questions and Answers

Question # 6

When should you introduce mention of supplier innovation to a supplier?

A.

supplier appraisal

B.

tender documents

C.

contract signing

D.

performance management meeting

Full Access
Question # 7

Darius is the CFO of a manufacturing organisation and has recently completed a financial data assessment through the use of a Data Cube. He has decided to ' roll up ' the data and present this to the Board of Directors. What does this mean?

A.

consolidate or aggregate the data

B.

fragment the data into smaller parts

C.

analyse the data through the use of graphs and charts

D.

use the data to benchmark the organisation

Full Access
Question # 8

The SCAMPER technique suggested by Eberle (2018) provides suggestions on which of the following?

A.

identifying opportunities to diversify and improve

B.

classifying suppliers

C.

monitoring supplier performance

D.

using technology to improve efficiencies

Full Access
Question # 9

An organisation which presents an ordinary product as environmentally friendly is conducting what?

A.

non-compliance

B.

lack of traceability

C.

blacklisting

D.

greenwashing

Full Access
Question # 10

Below are details of five companies who all have different types of relationships with their suppliers. For each company, select the corresponding relationship type and the main relationship- influencing KPI monitored by the company.

Company 1: The relationship is characterised by high levels of conflict, but is one in which there is mutual respect for each other’s ideas and innovative solutions are often formed from the conflict. This KPI is measured by the level of information sharing between the buyer and supplier and the level of reliability of both parties.

Company 2: There is a low level of co-operation between Company 2 and its main supplier. The contract is not expected to last much longer due to conflicts that cannot be resolved amicably. There is a low level of dependency on the supplier and a number of alternative providers in the marketplace.

Company 3: The relationship is characterised by a win-win approach and both parties consider themselves equal. The relationship is measured based on its openness, honesty and levels of information sharing, particularly in the disclosure of sensitive information.

Company 4: Company 4 works well with their supplier and there is little conflict. The relationship is important due to the high value of the contract and the two parties work together to meet the same goals. The KPI measures the exchanges and levels of collaboration between the parties.

Company 5: The supplier does not place much importance on the relationship with Company 5 due to the low value of the contract. Company 5 is worried that the supplier is not willing to invest in the contract and therefore are measuring the loyalty of the supplier as a KPI.

Complete the table below with the correct relationship type and relationship influencing KPI: nice, creative, marginal, hostile, partnership arm’s length, power, trust, co-operation, communication, commitment, transparency.

Which of the following will you put into box 3?

A.

nice

B.

creative

C.

marginal

D.

hostile

E.

partnership

F.

arm ' s-length

Full Access
Question # 11

The engineering process in which each function completes the task they are specialised in then passes it to the next team is commonly known as what process?

A.

Lean engineering

B.

Simultaneous Engineering

C.

Over-the-Wall Engineering

D.

Business Process Re-Engineering

Full Access
Question # 12

Below are details of five different companies and the data they collect. For each company, select the characteristic of the data collected and the business area it relates to.

Company 1: This company is collecting data which will assist in the designing of products- ensuring functionality at the lowest cost. The issue with the data is its seasonality.

Company 2: This company has a high number of data files. They are dismantling current ways of working to figure out if there is a more effective way to do things.

Company 3: Data collected by company 3 is collected at speed in real time. They are attempting to find any underlying patterns in the data to inform on better decision making.

Company 4: Company 4’s objective is to reduce the risk of exposure of the company to unforeseen events. Data is being collected in many different formats.

Company 5: This data is similar in format and content but is collected from a wide range of sources. The data looks at the costs and implications of raw materials used in production.

Complete the table below by listing the characteristic of the data and the corresponding business area (some options may be used twice); volume (x2), variety, velocity, variability, complexity, concurrent engineering, process design, statistical analysis, life cycle analysis, risk reduction, value engineering.

Which of the following will you put into box 7?

A.

concurrent engineering

B.

process design

C.

statistical analysis

D.

life cycle analysis

E.

risk reduction

F.

value engineering

Full Access
Question # 13

Sara is designing a tender for a consultant her organisation is hoping to hire. It is important for her that supplier innovation is included within the tender, as she is keen for the winning consultant to provide innovative ideas to her company. She has drafted a conformance specification to go along with her Invitation-to-Tender. Is this the correct thing for Sara to do?

A.

yes- all tenders must include a Specification

B.

yes- details of the required innovations should be included within a specification

C.

no- innovation should be addresses at interview stage

D.

no- the wrong type of specification is being used

Full Access
Question # 14

Wesley is putting together a Business Case to implement ' green ' procurement practices at his organisation. He is listing external drivers for sustainability- which of the following could he include within the list?

A.

potential cost savings

B.

recent legislation changes

C.

pressure from stakeholders

D.

security of supply

E.

customer demand

Full Access
Question # 15

Which of the following are benefits of using a cross-functional team in the procurement and supply function? Select all that apply

A.

increases the opportunity to make high-quality decisions

B.

reduces costs of procurement

C.

helps to confirm the accuracy of information

D.

provides a diversity of views

E.

ensures on-time delivery of goods and services

Full Access
Question # 16

The ISO 9001 standard for TQM is based on which founding principle?

A.

statistics

B.

benchmarking

C.

cost reduction

D.

customer focus

Full Access
Question # 17

Which of the following statements about Business Process Re-engineering are true? Select ALL that apply.

A.

workers make decisions

B.

it is a process of continuous improvement

C.

the customer is at the heart of BRP

D.

it can lead to a major reduction in costs and increased competitive advantage

E.

it can result in job losses

Full Access
Question # 18

Scenario analysis, sim-ulation and game theory are characteristics of which form of data analysis?

A.

descriptive

B.

prescriptive

C.

predictive

D.

diagnostic

Full Access
Question # 19

New product development is vital for organisations which operate in which type of marketplace?

A.

a marketplace with a high level of commoditisation

B.

a monopoly

C.

a marketplace with low barriers to exit

D.

a marketplace with low competitive rivalry

Full Access
Question # 20

Below are details of 5 companies who are all embarking on the launch of a new product. For each company, you must decide which innovation tactic they are using and the priority for the new contract.

Company 1: The company aims to design the specification around customers’ requirements. They are keen to ensure a balance between costs and the service provided.

Company 2: This company attends regular conferences held by a professional body and will use the information discussed to inform upon the specification. They are keen to ensure sufficient interest from the marketplace so are placing a priority on networking at the conferences.

Company 3: There is a small group of internal stakeholders who meet regularly at Company 3 who discuss supply chain and organisational integration. The priority for the group is to ensure that the supplier of the new product’s raw materials meets the company’s standards for environmental protection.

Company 4: This company has regular phone calls with suppliers discussing ideas for the new product. Once the product is launched, the focus will be on ensuring that the supplier is held to account.

Company 5: Equipment has been loaned to a supplier to produce a prototype of the new product. The aim of the project is to ensure the supplier is capable of producing the components required for the product before the contract is signed.

Complete the table below by listing the innovation tactic and contract priority for each company; focus group, innovation council, technology transfer, collaboration, supplier forum, early supplier involvement, supplier development, balanced scorecard, contract management, selection, value for money, bidding.

Which of the following will you put into box 6?

A.

supplier development

B.

balanced scorecard

C.

contract management

D.

selection

E.

value for money

F.

bidding

Full Access
Question # 21

What are the benefits of early supplier involvement? Select all that apply.

A.

information sharing

B.

higher levels of innovation

C.

better environmental protection

D.

smaller supply chains

Full Access
Question # 22

Pink Logistics is categorising the relationships it has with several suppliers. They have worked with Blue Trucks Ltd for seven years but the contract is of small value and therefore of little importance to Pink Logistics. There have been no issues of conflict during the lifetime of the contract and the relationship is transactional. According to the Relationship Interaction Matrix, how would the relationship between Pink Logistics and Blue Trucks Ltd best be characterised?

A.

nice

B.

marginal

C.

creative

D.

hostile

Full Access
Question # 23

The Plan-Do-Check-Act cycle provides a Framework for an organisation to follow under which ISO standard?

A.

ISO 14001

B.

ISO 14040

C.

ISO 20400

D.

ISO 27000

Full Access
Question # 24

Which ISO standard sets out the stages of a Life-Cycle Analysis?

A.

14001

B.

14040

C.

9001

D.

20400

Full Access
Question # 25

The cost of switching and the scarcity of resources affects which of the following relationship-influencing Key Performance Indicators?

A.

transparency

B.

co-operation

C.

trust

D.

power

Full Access
Question # 26

Below are details of five different companies and the data they collect. For each company, select the characteristic of the data collected and the business area it relates to.

Company 1: This company is collecting data which will assist in the designing of products- ensuring functionality at the lowest cost. The issue with the data is its seasonality.

Company 2: This company has a high number of data files. They are dismantling current ways of working to figure out if there is a more effective way to do things.

Company 3: Data collected by company 3 is collected at speed in real time. They are attempting to find any underlying patterns in the data to inform on better decision making.

Company 4: Company 4’s objective is to reduce the risk of exposure of the company to unforeseen events. Data is being collected in many different formats.

Company 5: This data is similar in format and content but is collected from a wide range of sources. The data looks at the costs and implications of raw materials used in production.

Complete the table below by listing the characteristic of the data and the corresponding business area (some options may be used twice); volume (x2), variety, velocity, variability, complexity, concurrent engineering, process design, statistical analysis, life cycle analysis, risk reduction, value engineering.

Which of the following will you put into box 8?

A.

concurrent engineering

B.

process design

C.

statistical analysis

D.

life cycle analysis

E.

risk reduction

F.

value engineering

Full Access
Question # 27

Swift Manufacturing is currently seeking new suppliers to create a new product that will be launched next year. They are keen to enter a new market and expand their customer base and ensure the new product provides value for money to the customer. The procurement department is currently conducting market research which will inform upon possible designs for the new product.

Simultaneously they are also speaking with suppliers regarding the specification. Swift Manufacturing are keen to ensure the new product is as environmentally friendly as possible, so are researching different raw materials that can be used and their impact upon the environment.

When designing the tender process, Swift Manufacturing would like the successful supplier to have an environmental management system in place and will incorporate this as part of the ‘essential criteria’ of the specification and tested on the PQQ stage of the tender.

It is important for the CEO of Swift Manufacturing that the supplier hits the ground running on this contract as soon as it is signed, given the importance of the new product to the organisation’s competitive advantage strategy. He is therefore keen to ensure that the procurement department include strict performance targets within the contract.

What is the main focus of the specification for the new product?

A.

cost

B.

quality

C.

compliance

D.

life-cycle analysis

Full Access
Question # 28

An organisation is attempting to increase the value for money of its own products by making improvements with its suppliers and supply chain. Which category of supplier will have the largest impact on this?

A.

tactical

B.

leverage

C.

critical

D.

strategic

Full Access
Question # 29

Design for Disassembly includes which three features?

A.

selecting suppliers based on their environmental standards

B.

upcycling products

C.

choosing materials that can be recycled

D.

labelling materials

E.

choosing fastenings which can be easily undone

Full Access
Question # 30

What is an e-wallet?

A.

a form of credit-card employees can use to make purchases

B.

a pre-paid account used for online transactions

C.

a gift card with a predetermined spend limit

D.

a digital version of a cheque

Full Access
Question # 31

Horizontal integration within an organisation ensures that project activities completed within each department are aligned with the organisation ' s strategic objectives. Is this sentence TRUE?

A.

yes- this prevents projects using up resources which are not focused on helping the organisation achieve its goals

B.

yes- all departments ' objectives are aligned to ensure everyone is working towards the same goals

C.

no- this describes vertical integration

D.

no- this describes the role of an innovation council

Full Access
Question # 32

In order to achieve competitive advantage, it is important that an organisation with several suppliers asks all of its suppliers to innovate, as this will lead to new ideas and cost savings. Is this TRUE?

A.

yes- the more people that innovate the better

B.

yes- all suppliers should be required to provide innovation suggestions as part of the contract

C.

no- only certain suppliers should be selected for this

D.

no- innovations should come from the organisation rather than their suppliers.

Full Access
Question # 33

Below are details of 5 companies who are all embarking on the launch of a new product. For each company, you must decide which innovation tactic they are using and the priority for the new contract.

Company 1: The company aims to design the specification around customers’ requirements. They are keen to ensure a balance between costs and the service provided.

Company 2: This company attends regular conferences held by a professional body and will use the information discussed to inform upon the specification. They are keen to ensure sufficient interest from the marketplace so are placing a priority on networking at the conferences.

Company 3: There is a small group of internal stakeholders who meet regularly at Company 3 who discuss supply chain and organisational integration. The priority for the group is to ensure that the supplier of the new product’s raw materials meets the company’s standards for environmental protection.

Company 4: This company has regular phone calls with suppliers discussing ideas for the new product. Once the product is launched, the focus will be on ensuring that the supplier is held to account.

Company 5: Equipment has been loaned to a supplier to produce a prototype of the new product. The aim of the project is to ensure the supplier is capable of producing the components required for the product before the contract is signed.

Complete the table below by listing the innovation tactic and contract priority for each company; focus group, innovation council, technology transfer, collaboration, supplier forum, early supplier involvement, supplier development, balanced scorecard, contract management, selection, value for money, bidding.

Which of the following will you put into box 3?

A.

focus group

B.

innovation council

C.

technology transfer

D.

collaboration

E.

supplier forum

F.

early supplier involvement

Full Access
Question # 34

What are the defining characteristics of ' Big Data ' ? Select THREE

A.

viability

B.

volume

C.

variety

D.

validity

E.

velocity

Full Access
Question # 35

Ali is the new Finance Manager at ABC Ltd. He has implemented a new system of diagnostic analysis and has shown this to the Head of Procurement. Which of the following are characteristics of this new system?

A.

uses historical data

B.

is prescriptive

C.

determines the relationship between cause and effect

D.

forecasts the likelihood of issues arising

Full Access
Question # 36

ISO 20400 sets out principles of sustainable procurement. Which of the following are key principles outlined by the standard? Select all that apply

A.

innovative solutions

B.

life-cycle costing

C.

continual improvement

D.

supply chain integration

E.

sound procurement policies

Full Access