Activate Your Black Friday Offer: 75% Discount on Exam Bundles! Use coupon code below! - Ends in 0d 00h 00m 00s - Coupon code: 75onlydt

L5M9 Questions and Answers

Question # 6

Below are details of 4 local manufacturing companies. For each company you must decide what the main objective is for the organisation and what layout their manufacturing plant has.

Company 1: This company creates large, delicate products which are hard to move. The main aim of the company is to stand out from competitors due to the superior level of materials used and by using the latest forms of technology to create the items.

Company 2: This company produces 72 different items and has designated zones within its premises for the creation of each item. The zones are organised based on the technology used and some products may be passed between different zones to be completed. The company creates many different items in response to changing customer demands, with many product lines only lasting a single season.

Company 3: Company 3 creates one product which flows along a single production line, with staff members adding to the product on four different occasions. The company must produce a high volume of this singular product in order to break even. Therefore, there is always a steady flow of items through the plant and it is important there is no stoppage in production.

Company 4: This company produces small batches of products, as and when they are ordered by customers. Due to uncertainty in demand, a high profit margin is added to the cost of each item. Teams in the factory are grouped into different areas depending on the technological process they are using.

Complete the table below by listing the objective criteria and plant layout for each company. Each response should only be used once: flexibility, speed, quality, cost, functional layout, cell layout, product layout, fixed-position layout

Company

Performance objective

Plant layout

Company 1

Box 1

Box 5

Company 2

Box 2

Box 6

Company 3

Box 3

Box 7

Company 4

Box 4

Box 8

Which of the following will you put into box 5?

A.

functional layout

B.

cell layout

C.

product layout

D.

fixed-position layout

Full Access
Question # 7

In order to keep processing costs down, which of the following should a company opt for in terms of operating processes?

A.

low volume, high variety

B.

high volume, low variety

C.

high variation, low visibility

D.

low variation, high visibility

Full Access
Question # 8

What is the principal process-improvement purpose of Six Sigma?

A.

Increase customer satisfaction without measuring performance

B.

Achieve financial break-even

C.

Reduce harmful process variation and associated defects

D.

Reduce waste without addressing process variation

Full Access
Question # 9

There are four manufacturing companies located on Seashell Industrial Estate. Each company creates a different product and employs a different maintenance approach to its operations. For each company, select the corresponding maintenance approach and the key operating process characteristic.

Company 1: This company creates craft beer and offers customers a tour of the brewery for a small charge. The brewing equipment is serviced monthly and the brewery is kept extremely clean. All equipment is labelled with the last service date.

Company 2: This company produces seasonal items such as Easter Eggs and Christmas Cake. The equipment has a control panel where lights will flash red advising staff to check oil levels and components. Staff can then report issues to the maintenance team if remedial work is required. Product demand fluctuates throughout the year.

Company 3: This equipment does not often break down and is only fixed when it is reported by staff as no longer working. Company 3 creates toys, providing a large range of product sizes and colours based on different customer requirements.

Company 4: Parts of the machine are serviced quarterly but in general, the machine is left to run its course and is then replaced when it is no longer financially viable to fix. The company produces cereal and the operating process is focused on the quantity produced and therefore uses standardised processes.

Complete the table below by listing the maintenance approach and operating process characteristic for each company. Each response should only be used once: preventive maintenance, run to breakdown maintenance, condition-based maintenance, mixed maintenance, volume, visibility, variation, variety

Company

Maintenance approach

Operating-process characteristic

Company 1

Box 1

Box 5

Company 2

Box 2

Box 6

Company 3

Box 3

Box 7

Company 4

Box 4

Box 8

Which of the following will you put into box 3?

A.

preventive maintenance

B.

run-to-breakdown maintenance

C.

condition-based maintenance

D.

mixed maintenance

Full Access
Question # 10

Under what circumstances would an 'intermittent operations' process be the most suitable?

A.

many different items are produced in low quantities

B.

where quality assurance must be carried out regularly

C.

an organisation with low numbers of manufacturing staff

D.

in high value, high volume production

Full Access
Question # 11

Blue Slipper Ltd is a multi-national organisation that produces a variety of cosmetic products. A team has been put together to create a strategy for the Marketing Department in order to increase sales and thus profitability. What level of strategy is being created?

A.

corporate level strategy

B.

business level strategy

C.

functional level strategy

D.

operational level strategy

Full Access
Question # 12

The Public Sector only provides Services not Goods. Is this TRUE?

A.

yes- the public sector provides services such as education and health care

B.

yes- the private sector is responsible for the production of goods, whereas services can be provided either by the public or private sector

C.

no- the public sector may provide goods as well as services

D.

no- the public sector provides goods rather than services

Full Access
Question # 13

Little Joy Ltd is a large company with several functional departments. Below are details of four departments. For each, you must decide which functional area of the business the department is, as well as the SERVQUAL Gap that each Department Lead is concerned with.

Department 1: This department is concerned with the creation of products. The products are created in line with BS EN 716-1 and undergo rigorous tests before they leave the factory. Many customers are unaware of the additional costs of testing to BS EN 716-1 and complain about the price of this product line.

Department 2: Other departments of the business are internal customers of this functional area and approach the Department Lead when they require something to be bought. Often the internal customers have unrealistic expectations of the timescales involved in the process and the Department Lead spends a lot of time explaining lead times and logistics.

Department 3: This functional area creates the budgets for the company and emails these to the Department Leads at the beginning of every quarter. Due to the complexity of the documents, other functional areas of the business often don’t understand the information provided.

Department 4: This area of the business is concerned with revenue, which has recently slumped. The Department Lead is conducting market surveys to find out the reason for this.

Complete the table below by listing the Functional Area of the business, and the corresponding SERVQUAL Gap. Each response should only be used once: procurement, finance, sales, production, satisfaction gap, delivery gap, standards gap, communication gap.

Department

Functional area

SERVQUAL gap

Department 1

Box 1

Box 5

Department 2

Box 2

Box 6

Department 3

Box 3

Box 7

Department 4

Box 4

Box 8

Which of the following will you put into box 3?

A.

procurement

B.

finance

C.

sales

D.

production

Full Access
Question # 14

Below are details of five companies who operate a Total Quality Management System (TQM). For each company, select the system used and identify which area of the Balanced Scorecard this relates to.

Company 1: The focus of this company is to gather real-time data to assess the quality of products created during the manufacturing process. There are tight budgets and reworking any defects will affect the bottom line.

Company 2: This company is concerned about how their products are received. They have recently completed market research focused on their client’s feelings. The objective is now to improve the product’s look and performance to meet these expectations.

Company 3: The focus of this company is defining the customer requirements and translating this into a high-quality specification and effective operational process.

Company 4: Within this company there is a group of 6 employees who meet regularly with the objective of reducing issues that arise in the manufacturing of products.

Complete the table below by listing the TQM System used and the relevant Balanced Scorecard criteria for each company. Each response should only be used once: Quality Circle, Statistical Process Control, Kansei Engineering, Quality Function Deployment, Finance Criteria, Business Process Criteria, Learning and Growth Criteria, Customer Criteria.

Company

TQM technique

Balanced Scorecard perspective

Company 1

Box 1

Box 5

Company 2

Box 2

Box 6

Company 3

Box 3

Box 7

Company 4

Box 4

Box 8

Which of the following will you put into box 4?

A.

quality circle

B.

statistical process control

C.

kansei engineering

D.

quality function deployment

Full Access
Question # 15

Below are details of five companies who operate a Total Quality Management System (TQM). For each company, select the system used and identify which area of the Balanced Scorecard this relates to.

Company 1: The focus of this company is to gather real-time data to assess the quality of products created during the manufacturing process. There are tight budgets and reworking any defects will affect the bottom line.

Company 2: This company is concerned about how their products are received. They have recently completed market research focused on their client’s feelings. The objective is now to improve the product’s look and performance to meet these expectations.

Company 3: The focus of this company is defining the customer requirements and translating this into a high-quality specification and effective operational process.

Company 4: Within this company there is a group of 6 employees who meet regularly with the objective of reducing issues that arise in the manufacturing of products.

Complete the table below by listing the TQM System used and the relevant Balanced Scorecard criteria for each company. Each response should only be used once: Quality Circle, Statistical Process Control, Kansei Engineering, Quality Function Deployment, Finance Criteria, Business Process Criteria, Learning and Growth Criteria, Customer Criteria.

Company

TQM technique

Balanced Scorecard perspective

Company 1

Box 1

Box 5

Company 2

Box 2

Box 6

Company 3

Box 3

Box 7

Company 4

Box 4

Box 8

Which of the following will you put into box 6?

A.

finance criteria

B.

business process criteria

C.

learning and growth criteria

D.

customer criteria

Full Access
Question # 16

Below are details of five companies who operate a Total Quality Management System (TQM). For each company, select the system used and identify which area of the Balanced Scorecard this relates to.

Company 1: The focus of this company is to gather real-time data to assess the quality of products created during the manufacturing process. There are tight budgets and reworking any defects will affect the bottom line.

Company 2: This company is concerned about how their products are received. They have recently completed market research focused on their client’s feelings. The objective is now to improve the product’s look and performance to meet these expectations.

Company 3: The focus of this company is defining the customer requirements and translating this into a high-quality specification and effective operational process.

Company 4: Within this company there is a group of 6 employees who meet regularly with the objective of reducing issues that arise in the manufacturing of products.

Complete the table below by listing the TQM System used and the relevant Balanced Scorecard criteria for each company. Each response should only be used once: Quality Circle, Statistical Process Control, Kansei Engineering, Quality Function Deployment, Finance Criteria, Business Process Criteria, Learning and Growth Criteria, Customer Criteria.

Company

TQM technique

Balanced Scorecard perspective

Company 1

Box 1

Box 5

Company 2

Box 2

Box 6

Company 3

Box 3

Box 7

Company 4

Box 4

Box 8

Which of the following will you put into box 2?

A.

quality circle

B.

statistical process control

C.

kansei engineering

D.

quality function deployment

Full Access
Question # 17

Tools by Tom is a manufacturer of hardware. They have recently advertised that a new range of hammers would be released shortly, however due to issues in the supply chain and a low-quality delivery of steel, the production of the new hammers has been put on hold. Of the following, which are internal impacts of failure for the company? Select TWO.

A.

loss of credibility

B.

customer complaints

C.

downtime

D.

wasted resources

E.

decreased market share

Full Access
Question # 18

At which point in the manufacturing process would Failure Mode and Effects Analysis (FMEA) be first used?

A.

before manufacturing begins

B.

at regular intervals during the manufacturing process

C.

once all items have been processed, before they are sent to customers

D.

on a faulty item if it is returned from a customer

Full Access
Question # 19

There are four manufacturing companies located on Seashell Industrial Estate. Each company creates a different product and employs a different maintenance approach to its operations. For each company, select the corresponding maintenance approach and the key operating process characteristic.

Company 1: This company creates craft beer and offers customers a tour of the brewery for a small charge. The brewing equipment is serviced monthly and the brewery is kept extremely clean. All equipment is labelled with the last service date.

Company 2: This company produces seasonal items such as Easter Eggs and Christmas Cake. The equipment has a control panel where lights will flash red advising staff to check oil levels and components. Staff can then report issues to the maintenance team if remedial work is required. Product demand fluctuates throughout the year.

Company 3: This equipment does not often break down and is only fixed when it is reported by staff as no longer working. Company 3 creates toys, providing a large range of product sizes and colours based on different customer requirements.

Company 4: Parts of the machine are serviced quarterly but in general, the machine is left to run its course and is then replaced when it is no longer financially viable to fix. The company produces cereal and the operating process is focused on the quantity produced and therefore uses standardised processes.

Complete the table below by listing the maintenance approach and operating process characteristic for each company. Each response should only be used once: preventive maintenance, run to breakdown maintenance, condition-based maintenance, mixed maintenance, volume, visibility, variation, variety

Company

Maintenance approach

Operating-process characteristic

Company 1

Box 1

Box 5

Company 2

Box 2

Box 6

Company 3

Box 3

Box 7

Company 4

Box 4

Box 8

Which of the following will you put into box 2?

A.

preventive maintenance

B.

run-to-breakdown maintenance

C.

condition-based maintenance

D.

mixed maintenance

Full Access
Question # 20

Bilal is an Operations Manager at an apple pie manufacturer and is currently undertaking an Aggregate Capacity Analysis. What is the purpose of this?

A.

It will help Bilal decide if he needs to hire more workers in the short term to ensure the factory produces enough apple pies to meet demand

B.

It will tell Bilal if he has the correct number of apples he needs to produce the desired number of apple pies

C.

It will help Bilal assess if he is working within the allocated budget

D.

It will give Bilal an overall evaluation of the company's ability to meet demand fluctuations

Full Access
Question # 21

Continuous Operations is a manufacturing methodology which is driven by forecasted customer numbers and has a low level of work-in-progress inventory. Is this true?

A.

yes- in continuous operations there is a low level of automation

B.

yes- in continuous operations there is a high level of standardisation

C.

no- in continuous operations actual customer numbers are used

D.

no- in continuous operations there is a high level of work-in-progress inventory

Full Access
Question # 22

There are four dimensions of operating processes; volume, variety, variation and visibility. What is meant by variation?

A.

the fluctuation in demand for an item

B.

the number of different products made

C.

the number of different customers / markets for the product

D.

the amount of different uses for the item being produced

Full Access
Question # 23

When processing low volumes of a product, specialisation is high and it is therefore possible to create products at a lower unit cost. Is this TRUE?

A.

yes- staff gain specialities when there is less products to create

B.

yes- when producing low volumes of a product, cost savings can be transferred to the customer

C.

no- creating products in low volumes often leads to a higher unit cost

D.

no- the volume of products created does not impact upon unit costs as these are fixed in advance

Full Access
Question # 24

Performance Benchmarking is a form of what type of benchmarking?

A.

internal

B.

external

C.

competitive

D.

non-competitive

Full Access
Question # 25

Which of the following would you likely find on a Process Control Chart which is being used to monitor the quality of products manufactured in a factory?

A.

frequency of defects

B.

upper and lower control limits

C.

arrows showing the flow of goods

D.

different activities completed and the amount of slack available in each activity

Full Access
Question # 26

A manufacturing company makes taps which they advertise with a guarantee of durability for 10 years. At which point in time would you expect most defects to be found?

A.

Within the first year

B.

between 1-2 years

C.

between 2-5 years

D.

between 5-6 years

Full Access
Question # 27

Which of the following operational activities is specifically concerned with checking that completed project outputs conform to customer specifications?

A.

process selection

B.

quality control

C.

procurement

D.

project management

Full Access
Question # 28

There are four manufacturing companies located on Seashell Industrial Estate. Each company creates a different product and employs a different maintenance approach to its operations. For each company, select the corresponding maintenance approach and the key operating process characteristic.

Company 1: This company creates craft beer and offers customers a tour of the brewery for a small charge. The brewing equipment is serviced monthly and the brewery is kept extremely clean. All equipment is labelled with the last service date.

Company 2: This company produces seasonal items such as Easter Eggs and Christmas Cake. The equipment has a control panel where lights will flash red advising staff to check oil levels and components. Staff can then report issues to the maintenance team if remedial work is required. Product demand fluctuates throughout the year.

Company 3: This equipment does not often break down and is only fixed when it is reported by staff as no longer working. Company 3 creates toys, providing a large range of product sizes and colours based on different customer requirements.

Company 4: Parts of the machine are serviced quarterly but in general, the machine is left to run its course and is then replaced when it is no longer financially viable to fix. The company produces cereal and the operating process is focused on the quantity produced and therefore uses standardised processes.

Complete the table below by listing the maintenance approach and operating process characteristic for each company. Each response should only be used once: preventive maintenance, run to breakdown maintenance, condition-based maintenance, mixed maintenance, volume, visibility, variation, variety

Company

Maintenance approach

Operating-process characteristic

Company 1

Box 1

Box 5

Company 2

Box 2

Box 6

Company 3

Box 3

Box 7

Company 4

Box 4

Box 8

Which of the following will you put into box 6?

A.

volume

B.

visibility

C.

variation

D.

variety

Full Access
Question # 29

When conducting Failure Mode and Effects Analysis (FMEA), which systems could be used to communicate or assess risks to business operations? Select TWO.

A.

ABC analysis

B.

Generic colour coding

C.

Red-Amber-Green (RAG) system

D.

A numerical scale from 1 to 10

Full Access
Question # 30

Little Joy Ltd is a large company with several functional departments. Below are details of four departments. For each, you must decide which functional area of the business the department is, as well as the SERVQUAL Gap that each Department Lead is concerned with.

Department 1: This department is concerned with the creation of products. The products are created in line with BS EN 716-1 and undergo rigorous tests before they leave the factory. Many customers are unaware of the additional costs of testing to BS EN 716-1 and complain about the price of this product line.

Department 2: Other departments of the business are internal customers of this functional area and approach the Department Lead when they require something to be bought. Often the internal customers have unrealistic expectations of the timescales involved in the process and the Department Lead spends a lot of time explaining lead times and logistics.

Department 3: This functional area creates the budgets for the company and emails these to the Department Leads at the beginning of every quarter. Due to the complexity of the documents, other functional areas of the business often don’t understand the information provided.

Department 4: This area of the business is concerned with revenue, which has recently slumped. The Department Lead is conducting market surveys to find out the reason for this.

Complete the table below by listing the Functional Area of the business, and the corresponding SERVQUAL Gap. Each response should only be used once: procurement, finance, sales, production, satisfaction gap, delivery gap, standards gap, communication gap.

Department

Functional area

SERVQUAL gap

Department 1

Box 1

Box 5

Department 2

Box 2

Box 6

Department 3

Box 3

Box 7

Department 4

Box 4

Box 8

Which of the following will you put into box 1?

A.

procurement

B.

finance

C.

sales

D.

production

Full Access
Question # 31

JJ Ltd is a sporting goods manufacturer who is based in the UK. It is considering expanding its operations to include manufacturing sites based in South America. Which of the following considerations will JJ Ltd need to consider now that they are becoming an international organisation? Select TWO

A.

keeping costs down

B.

cultural aspects

C.

quality standards

D.

product design

Full Access
Question # 32

In which industry would scheduling, health and safety and quality control be key focuses of operations processes?

A.

finance

B.

construction

C.

agriculture

D.

retail

Full Access
Question # 33

There are four manufacturing companies located on Seashell Industrial Estate. Each company creates a different product and employs a different maintenance approach to its operations. For each company, select the corresponding maintenance approach and the key operating process characteristic.

Company 1: This company creates craft beer and offers customers a tour of the brewery for a small charge. The brewing equipment is serviced monthly and the brewery is kept extremely clean. All equipment is labelled with the last service date.

Company 2: This company produces seasonal items such as Easter Eggs and Christmas Cake. The equipment has a control panel where lights will flash red advising staff to check oil levels and components. Staff can then report issues to the maintenance team if remedial work is required. Product demand fluctuates throughout the year.

Company 3: This equipment does not often break down and is only fixed when it is reported by staff as no longer working. Company 3 creates toys, providing a large range of product sizes and colours based on different customer requirements.

Company 4: Parts of the machine are serviced quarterly but in general, the machine is left to run its course and is then replaced when it is no longer financially viable to fix. The company produces cereal and the operating process is focused on the quantity produced and therefore uses standardised processes.

Complete the table below by listing the maintenance approach and operating process characteristic for each company. Each response should only be used once: preventive maintenance, run to breakdown maintenance, condition-based maintenance, mixed maintenance, volume, visibility, variation, variety

Company

Maintenance approach

Operating-process characteristic

Company 1

Box 1

Box 5

Company 2

Box 2

Box 6

Company 3

Box 3

Box 7

Company 4

Box 4

Box 8

Which of the following will you put into box 1?

A.

preventive maintenance

B.

run-to-breakdown maintenance

C.

condition-based maintenance

D.

mixed maintenance

Full Access
Question # 34

A fast-food restaurant provides a drink machine for customers to use, which allows the customer to select the drink that they wish by putting their cup under the machine and pushing a button. The machine will first drop ice into the cup, but this button will not work unless the cup is placed on an X. What is this an example of?

A.

redundancy

B.

preventive maintenance

C.

fail safing

D.

run to breakdown

Full Access
Question # 35

Penny is the Operations Manager at a small furniture manufacturing company that makes tables and chairs, among other wooden household items. In the manufacturing site there is a small warehouse which stores inventory which is used in unforeseen circumstances such as a late delivery. What is the name given to this type of inventory?

A.

anticipation inventory

B.

buffer stock

C.

work-in progress

D.

transit inventory

Full Access
Question # 36

Below are details of five companies who operate a Total Quality Management System (TQM). For each company, select the system used and identify which area of the Balanced Scorecard this relates to.

Company 1: The focus of this company is to gather real-time data to assess the quality of products created during the manufacturing process. There are tight budgets and reworking any defects will affect the bottom line.

Company 2: This company is concerned about how their products are received. They have recently completed market research focused on their client’s feelings. The objective is now to improve the product’s look and performance to meet these expectations.

Company 3: The focus of this company is defining the customer requirements and translating this into a high-quality specification and effective operational process.

Company 4: Within this company there is a group of 6 employees who meet regularly with the objective of reducing issues that arise in the manufacturing of products.

Complete the table below by listing the TQM System used and the relevant Balanced Scorecard criteria for each company. Each response should only be used once: Quality Circle, Statistical Process Control, Kansei Engineering, Quality Function Deployment, Finance Criteria, Business Process Criteria, Learning and Growth Criteria, Customer Criteria.

Company

TQM technique

Balanced Scorecard perspective

Company 1

Box 1

Box 5

Company 2

Box 2

Box 6

Company 3

Box 3

Box 7

Company 4

Box 4

Box 8

Which of the following will you put into box 3?

A.

quality circle

B.

statistical process control

C.

kansei engineering

D.

quality function deployment

Full Access