Summer Sale - Special Limited Time 65% Discount Offer - Ends in 0d 00h 00m 00s - Coupon code: dpt65

7303 Questions and Answers

Note! Following 7303 Exam is Retired now. Please select the alternative replacement for your Exam Certification.

7303 Questions and Answers

Question # 6

A technician is installing an Avaya CallPilot with the NTRH40CA MBP96 CAT5 board and two NTRB18DA Mgate cards. When cabling the NTRB18DA Mgate cards in a Communication Server 1000S Media Gateway, which statement describes the cabling configuration that is the most valid?

A.

Attach the customersupplied RJ-45cables to thefaceof the Mgate cards and then to the MBP96 card.

B.

Attach the customer supplied RJ-45 cables to the backplane of the Media Gateway or MediaGateway expansion cabinet and then to the MBP96 card.

C.

AttachNTDU0609 cables to the face of the Mgate cards and route them outside the Media Gateway. Then couple the customer supplied RJ-45 cables from the NTDU0609 to the MPB96 cards.

D.

Attach the NTDU0609 cables to the face of the Mgate cards and take them outside the Media ay lo a customer supplied Ethernet hub. Attach RJ-45 cable from the hub to the MPB96cards.

Full Access
Question # 7

A company has recently decided to implement their speech activated messaging. They purchased a keycode for four speech activated messaging channels on their existing system.

How many Multimedia Processing Units (MPUs) must be available to enable all four channels?

A.

4MPUs

B.

8 MPUs

C.

12MPUs

D.

16 MPUs

Full Access
Question # 8

A company has decided to install an Avaya CallPilot RIs. 5.0 system to supply them with multimedia messaging applications at their offices in London. A technician has successfully installed and configured both the Avaya CallPilot and Communication Server 1000E systems.

How is the successful installation of the language prompts verified?

A.

Log into the AvayaCallPilotdesktop and verify the language files are installedin the correct location.

B.

Launch the AvayaCallPilotsystem monitor and verify the installed languages.

C.

Dial the voicemail CDN and verify that AvayaCallPilotanswers with the correct language.

D.

Reinstall the correctlanguageprompts.

Full Access
Question # 9

A technician observes the following error on a 1006r.

“Adapter 1 Channel 1 Target 6: Status of Power Supply #2=0x80: Unknown status, or Status Not Reportable"

Which action should be performed?

A.

Reseat and/or replace Power Supply #2.

B.

Contact an electrician to investigate.

C.

Ensure the alarm monitor cable is properly connected.

D.

The error is self-correcting and no actionis required.

Full Access
Question # 10

The Avaya CallPitol server being set up needs to be configured for the customer's network. These settings are accessed using the Avaya CallPilot Manager Home Page.

Which feature is used for these settings?

A.

Avaya CallPilot Manager

B.

Configuration Wizard

C.

Local Site Information

D.

HyperTerminal console

Full Access