Labour Day - Special 70% Discount Offer - Ends in 0d 00h 00m 00s - Coupon code: 70dumps

NS0-516 Questions and Answers

Question # 6

Which NetApp tool provides information on size, weight, acoustic noise, and power of NetApp E-Series systems?

A.

Hardware Universe

B.

Interoperability Matrix Tool

C.

Config Advisor

D.

Active IQ

Full Access
Question # 7

What are two methods for setting the host protocol configuration on the E2800 controller with a 4-port 16Gbps FC or 10Gbps iSCSI SFP+ host interface card (HIC)? (Choose two.)

A.

Set at the factory, based on the order

B.

Change the QSFP type in the HIC

C.

Change the Feature Pack in the SANtricity System Manager

D.

Set in the Hardware tab using SANtricity System Manager

Full Access
Question # 8

A customer is running several EF570 systems and uses the ability of the EF-Series systems to run two host protocols at the same time. You are installing a new EF570 that uses the NVMe protocol for a high performance computing application. The controller on-board ports will not connect, but the HIC ports are working fine.

In this scenario, what is the problem?

A.

The on-board host ports are disabled

B.

There is a cable fault preventing the on-board ports from connecting

C.

The on-board ports have the wrong SFPs for the desired network protocol

D.

The switch ports are shut-down

Full Access
Question # 9

A customer is configuring an EF570 system on an internal network. Due to security concerns, the network does not have Internet access. The customer wants to regularly send standard support data to NetApp.

In this scenario, what should the customer do to accomplish this task?

A.

Enable AutoSupport with a set interval and with the store locally option selected, manually move the data to a server with Internet access, and then send the data to NetApp.

B.

Open a support ticket with NetApp to enable AutoSupport local functionality, manually move the data to a server with Internet access, and then send the data to NetApp.

C.

Set up a script to initiate Collect Support Data on a set interval, manually move the data to a server with Internet access, and then send the data to NetApp.

D.

Set up a script to initiate Collect Support Data, remove the extra log files, manually move the data to a server with Internet access, and then send the data to NetApp.

Full Access