LEED-AP-ID+C Dumps with Practice Exam Questions Answers

Renewable Energy Certificates (RECs) represent proof that energy has been generated from renewable sources. These certificates can be used by organizations to offset emissions from purchased electricity, which is considered scope two emissions. RECs are specifically designed for this purpose and are not applicable to non-electric energy use or electricity produced on-site.

References: This information aligns with the LEED v4 Reference Guide for Interior Design and Construction, which provides guidelines for achieving credits related to energy and atmosphere, including the use of RECs12.

The use of MERV 13 (F7) air filters is specifically required for the Indoor Environmental Quality Credit, Enhanced Indoor Air Quality Strategies. This requirement is part of the strategies to improve indoor air quality by reducing particulate matter in the air, which can be achieved by using filters with a Minimum Efficiency Reporting Value (MERV) of 13 or higher1.

References:

• LEED v4: Interior Design + Construction Guide1.
• LEEDuser’s discussion on Filtration Credit Requirements1.

To document the non-structural elements that will be reused in a LEED AP Interior Design and Construction project, it is necessary to have drawings that indicate the elements to be reused. These drawings provide a visual representation of what is being kept from the existing space. Additionally, a tracking spreadsheet is essential for documenting the detailsof these elements, including their condition, location, and any other relevant information that supports the reuse strategy.

References: The information aligns with the LEED v4.1 requirements for Interiors Life-Cycle Impact Reduction, where documentation of reused non-structural elements is part of the credit achievement process1.

When green power is not Green-e certified, the project team can still pursue the Energy and Atmosphere Credit for Green Power by demonstrating that the purchased green power meets equivalent standards. This involves providing documentation that verifies the green power’s quality and production process align with the criteria set by Green-e certification.

References: The LEED v4 Reference Guide for Interior Design and Construction includes provisions for using green power that is not Green-e certified, as long as the project teamcan substantiate its equivalence. This can be done through third-party verification and ensuring that the energy source meets the requirements for renewable resources detailed in the current version of the Green-e standard123.

To meet the requirements for Indoor Environmental Quality Credit, Interior Lighting, Option 1, the design team should specify lighting controls that enable adjustments to suit individual tasks and preferences. This includes providing controls that allow for on, off, and at least one intermediate light level, such as 50%. Overhead lighting with these controls for the open-office space would meet this criterion.

References: The LEED reference guide for Interior Design and Construction provides detailed information on the requirements for lighting controls under the Indoor Environmental Quality Credit, Interior Lighting, Option 1. Specifically, it states that for at least 90% of individual occupant spaces, there must be individual lighting controls that enable occupants to adjust the lighting to suit their tasks and preferences, with at least three lighting levels or scenes (on, off, midlevel) 1.