HPE7-V01 Questions and Answers

The correct answer is A. The switch output clearly identifies the VTEP origin as “static,” and the VNI is mapped to VLAN 150 with routing disabled. In ArubaOS-CX static VXLAN, the administrator manually configures the VXLAN interface, source IP address, VNI, and peer VTEP. Aruba documentation for static VXLAN states that the peer VTEP IP address is explicitly defined with the vtep-peer command. Option B describes EVPN-VXLAN behavior, where BGP EVPN is used as the control plane to advertise MAC/IP and VTEP reachability dynamically. That is not what the output shows; the displayed origin is static. Option C is unsupported by the exhibit because no license state or scale limit is shown. Option D is incorrect because VXLAN interoperability depends on protocol support, configuration, MTU, underlay reachability, and feature compatibility, not on both sites using the exact same CX switch model. Reference/topics: ArubaOS-CX VXLAN, static VTEP configuration, VNI-to-VLAN mapping, underlay/overlay validation.

The correct answer is D. The proposal contains too many HPE Composer2 appliances for the stated management requirement. HPE Synergy Composer provides the embedded HPE OneView management appliance function for Synergy. For high-availability management, HPE guidance requires Composers of the same type to be paired within the same management ring; the design does not require two Composer2 appliances in every frame simply because there are three frames. HPE documentation states that if redundancy is required, two Composers of the same type must be paired within the same management ring per HPE Synergy system. Option A is wrong because OneView Advanced licenses are not added separately for Virtual Connect modules or D3940 storage modules in the manner stated. Option B is wrong because the compute modules still require appropriate HPE OneView licensing. Option C is also wrong because WWN virtualization and profile mobility are delivered through HPE Virtual Connect and HPE OneView server profiles, not by simply adding standalone 32Gb FC switches. The key proposal correction is reducing the excessive Composer2 count while preserving redundant management. Reference/topics: HPE Synergy Composer2, logical enclosure management, HPE OneView, management redundancy, proposal validation.

The correct answer is D because HPE OneView for VMware vCenter is an integration that allows VMware administrators to manage supported HPE infrastructure directly from the VMware vCenter environment when the infrastructure is already managed by HPE OneView. It is used to simplify lifecycle operations, hardware visibility, firmware management, and ESXi deployment workflows for HPE ProLiant and HPE Synergy systems. HPE documentation states that HPE OneView for VMware vCenter integrates HPE server, storage, and networking management into the VMware console and supports bare-metal ESXi deployment for HPE ProLiant and Synergy platforms. Option A is incorrect because the VMware integration itself is not treated as a separate per-host commercial product in the way the option implies; the underlying HPE OneView licensing and supported hardware management are the key prerequisites. Option B incorrectly introduces capacity-based licensing for each storage component. Option C is too restrictive and incorrectly ties the integration’s use to a specific vSphere edition statement. This question maps to the course objective of selecting appropriate HPE tools and information resources for VMware-integrated infrastructure management.

The correct answer is B because the CPU power level exceeds the range normally handled by standard or high-performance air-cooling options for this server design. For HPE ProLiant DL360 Gen11 configurations with very high-wattage processors, HPE design guidance identifies closed-loop liquid cooling as the required or appropriate cooling mechanism for processors at or above the higher thermal threshold. The key phrase in the scenario is that the customer wants to reuse existing third-party, 42U, air-cooled racks with the least amount of change. Closed-loop liquid cooling is self-contained inside the server cooling assembly and does not require the customer to deploy facility-level liquid-cooled racks or direct-liquid-cooling infrastructure. Option A introduces a larger rack and facility change, which violates the “least amount of changes” requirement. Option C implies external liquid-cooling infrastructure and is therefore more disruptive. Option D is incorrect because high-performance fans are intended for lower thermal design power ranges and are not sufficient for CPUs exceeding the stated 270-watt threshold. This aligns with the course’s ProLiant Gen11/Gen12 server design and validation objectives.

The correct answer is C. The customer requirement is explicit: four SFP28 iSCSI ports per controller node. An HPE Alletra Storage MP B10000 controller pair has two nodes, so the design requires eight usable SFP28 optical connections in total when all four 25GbE ports on each node are to be populated. The BOM already includes the Ethernet host bus adapters required for the iSCSI personality; the gap is the number of optical transceivers. HPE Alletra Storage MP B10000 supports host-port configuration by node, and HPE QuickSpecs list host port limits by controller model. HPE also identifies the 10/25GbE 4-port Host Bus Adapter as the correct Ethernet HBA class for Alletra Storage MP connectivity, while the Q2P64B item is the 25Gb SFP28 short-wave extended-temperature optical transceiver. Option A incorrectly removes the HBAs. Option B adds unnecessary HBAs instead of completing the optics population. Option D replaces adapters unnecessarily when the correct Ethernet HBA capacity is already present. The required correction is to add the missing four SFP28 transceivers so that all eight 25GbE ports can be used for iSCSI. Reference/topics: B10000 host-port sizing, iSCSI connectivity, SFP28 transceiver validation, BOM review.

The correct answer is A. Existing HPE SimpliVity environments can be brought into the HPE GreenLake / Private Cloud Business Edition management experience by deploying the Data Services Connector virtual machine and importing the system into Data Services Cloud Console. HPE documentation states that Data Services Connectors are VMs that enable management of Private Cloud Business Edition with HPE Alletra Storage MP B10000 and HPE SimpliVity, and HPE guidance for existing SimpliVity customers describes downloading the connector VM, registering it, and importing SimpliVity systems. Option B is too vague and does not identify the required technical onboarding component. Option C confuses compute fleet lifecycle onboarding with PCBE/SimpliVity service integration; iLO activation through Compute Ops Management does not import a SimpliVity cluster into DSCC as a PCBE resource. Option D is legacy/analytics-oriented and does not provide the PCBE feature integration requested. Reference/topics: HPE GreenLake, DSCC, Data Services Connector, HPE SimpliVity onboarding, Private Cloud Business Edition integration.

The correct answer is A. Omnissa Unified Access Gateway is the edge access component used with Horizon to provide secure remote access from an external network to internal Horizon desktops and applications. It is commonly positioned in a DMZ and avoids exposing internal Horizon infrastructure directly to external users. Omnissa documentation describes Unified Access Gateway as enabling secure remote access from external networks to Workspace ONE and Horizon resources, and Horizon installation guidance describes it as the default gateway for secure access to remote desktops and applications from outside the corporate firewall. Option B is incorrect because Horizon support is not limited to a minimum of more than 720 desktops, nor is it only supported through a generic HPE Compute qualification. Option C is technically wrong because Horizon can use supported VMware datastore types such as VMFS, NFS, and vVols depending on the validated design. Option D is also wrong because GPU resources are required only for graphics-accelerated use cases, not for every Horizon cluster. Reference/topics: workload requirement analysis, VDI architecture, HPE compute platform positioning, secure access design.

The correct answer is A because the customer is asking for a network refresh without traditional capital purchase and also wants externalized operational management. HPE GreenLake for Networking is positioned as a Network-as-a-Service model that allows customers to consume HPE Aruba Networking capabilities in a cloud-like operating model rather than buying every component upfront. HPE’s GreenLake for Networking QuickSpecs describe it as a comprehensive NaaS offering for consuming HPE Aruba Networking Edge Services Platform capabilities in a cloud-like way. HPE Managed Services can also provide remote monitoring, management, and optimization of supported infrastructure, which aligns with the customer’s desire to move LAN management to an external provider. Option B is too narrow because the offer is not merely a software-license subscription. Option C confuses HPE GreenLake for Networking with Aruba Central-style cloud management. Option D is incorrect because the service is built around HPE Aruba Networking solutions, not generic expert support for arbitrary third-party wireless platforms. Reference/topics: HPE GreenLake for Networking, NaaS positioning, HPE Managed Services, business-outcome mapping.

The correct answer is D. Aruba Fabric Composer is a data-center fabric automation and visibility platform for ArubaOS-CX network fabrics, and it can integrate with external virtualization managers such as VMware vSphere. In a mixed HPE and non-HPE environment, this matters because the compute hardware vendor is not the deciding factor for visibility into VMware-owned networking constructs. Aruba Fabric Composer can recognize VLAN groups owned or managed by external resources such as VMware vSphere, and the user guide explicitly describes VMware vSphere as an external manager that can own and manage VLAN groups. Option A is wrong because HPE Alletra Storage MP B10000 array management belongs to HPE storage management services such as DSCC/Data Ops Manager, not Aruba Fabric Composer. Option B is wrong because SAN zoning is Fibre Channel fabric work, not a function of ArubaOS-CX Ethernet switching. Option C is also incorrect because Pensando Distributed Services Cards are not managed through Aruba Fabric Composer as a general server-card management plane. Reference/topics: Aruba Fabric Composer, VMware integration, VLAN visibility, mixed-infrastructure discovery.

The correct answer is C because adding additional expansion chassis changes the physical hardware boundary of the HPE Superdome Flex complex and the resources assigned to the existing nPartition. Such a change cannot be treated like a live virtual-machine operation or a simple online software adjustment. The existing nPartition must be powered off before the physical expansion and partition-resource changes can be completed safely and consistently. Option A is incorrect because HPE OneView management does not require removing the nPartition from management merely to perform a hardware expansion; HPE OneView supports management of Superdome Flex-class infrastructure. Option B is incorrect because adding expansion chassis does not require replacing an expansion chassis with another base chassis for I/O redundancy in the way stated. Option D is also insufficient because placing the partition into a maintenance mode from the Rack Management Controller CLI is not equivalent to powering off the partition for a chassis-level expansion. The course includes Superdome Flex and scale-up compute designs for database and mission-critical workloads, so this question validates correct lifecycle planning for large HPE scale-up systems.