Summer Special Sale - Special 70% Discount Offer - Ends in 0d 00h 00m 00s - Coupon code: 70dumps

HPE6-A71 Questions and Answers

Question # 6

Which Aruba Unified Communications and Collaboration (UCC) deployment mode should be used when UCC is disabled on the Mobility Controllers (MCs)?

A.

Heuristics mode

B.

WMM mode

C.

ALG mode

D.

SDN-API mode

Full Access
Question # 7

An administrator wants to deploy Zero Touch Provisioning (ZTP) with Activate. The controllers run ArubaOS.8.x.

Which Aruba architecture should the administrator deploy?

A.

Master-Local

B.

Standalone

C.

AirWave

D.

Mobility Master-Mobility Controller

Full Access
Question # 8

Which two protocols does AirWave use to monitor Aruba Mobility Controllers (МС)?

A.

PAPI and AMON

B.

SNMP and AMON

C.

PAPI and GRE

D.

SNMP and SSH

Full Access
Question # 9

An administrator manages an Aruba wireless solution, deployed in a company with locations across the world. In one country, the local government organization that controls wireless transmissions increases the maximum EIRP allowed for certain channels.

Which component does the administrator need to update on the Mobility Master (MM) to accommodate this change?

A.

the Controller port configuration

B.

the regulatory-cert file

C.

the AP system profile

D.

the AP Group configuration

Full Access
Question # 10

An administrator configures a network scan set in AirWare to scan a subnet to discover new switches. The scan completes and AirWave successfully uses the SNMP credentials to validate SNMP access. However, SSH access fails and the administrator must manually configure the SSH credentials used for all of these devices.

To prevent this problem in the future, what should the administrator complete prior to running the network scan?

A.

Define the SSH communication parameters under the Group’s Manage section.

B.

Define a scan credentials set that includes the SSH communication parameters.

C.

Define the SSH communication parameters under the AP/Device’s Manage section.

D.

Define the SSH communication parameters for the Default Credentials under Device Setup section.

Full Access
Question # 11

An administrator wants to simulate network traffic and analyze results in an Aruba wireless network to test components such as WPA-2, DHCP, and other protocols. Which Aruba solution implements these functions?

A.

Clarity Live

B.

AirWave VisualRF

C.

AirWave RAPIDS

D.

Clarity Synthetic

Full Access
Question # 12

An administrator configures two Mobility Masters (MMs) for redundancy and database synchronization. Which protocol transports database information between the two MMs?

A.

AMON

B.

SNMP

C.

IPSec

D.

VRRP

Full Access
Question # 13

An administrator wants to implement a Live Upgrade (in-service upgrade) of a cluster in an Aruba wireless solution. Which ArubaOS feature does the Mobility Master (MM) use to ensure RF redundancy, so that when one or more APs are rebooted there is no loss of wireless coverage for users?

A.

AirMatch

B.

Mobility Controller load balancing

C.

AP image preload

D.

AP image verification

Full Access
Question # 14

An administrator creates a user role that department A in a company uses. Various other roles exist for other departments. All employees connect to the same ESSID, which authenticates to an external AAA server. How should the administrator configure to assign the appropriate roles to the employees?

A.

implement default roles

B.

implement server-derived roles

C.

implement user roles

D.

implement AAA profile roles

Full Access
Question # 15

An administrator wants to dynamically upgrade AppRF on Aruba Mobility Controllers (MC) in a cluster. The administrator does not want to reboot the system at the time of the upgrade.

What should the administrator use for this upgrade?

A.

Aruba image

B.

Upgrade Profiles

C.

Loadable Service Module (LSM)

D.

Cluster Upgrade Manager

Full Access
Question # 16

Refer to the exhibit.

An administrator supports a RAP at a branch office shown in the exhibit. The company has one Mobility Controller (MC) at the Primary DMZ site and one at the Secondary DMZ site. The RAP is configured to connect to only the MC at the Primary DMZ site. A network outage with the ISP at the Primary DMZ site causes the RAP to reboot. Upon reboot, the RAP cannot build a tunnel to the Secondary DMZ site MC because the administrator forgot to add the Second LMS IP address to the AP Group configuration. Once the RAP can successfully connect, the administrator can add the Secondary DMZ MC as a backup LMS to fix the AP Group.

What should the administrator implement to allow the RAP to connect to the MC at the Secondary DMZ site while the outage at the primary site persists?

A.

Dynamic discovery through DHCP Option 43

B.

Static configuration from apboot mode

C.

Dynamic discovery through DHCP Option 60

D.

Dynamic discovery through multicast ADP

Full Access
Question # 17

An administrator currently manages an L2 cluster with Aruba Mobility Controllers (MCs) that run ArubaOS 8.x. What happens when the administrator enables AP load balancing?

A.

AP load balancing occurs when the rebalance and unbalance thresholds are met.

B.

Users must re-authenticate if they are moved from one controller to another because load balancing is performed.

C.

Balancing of users is based on a hash of their IP address.

D.

AP load balancing is triggered based on the amount of user traffic that users generate.

Full Access
Question # 18

On the Aruba Mobility Master (MM), when is an AP configured to act as Mesh Portal or Mesh Point?

A.

when the mesh cluster profile is created

B.

at the time of the AP’s apboot mode CLI

C.

when the APs are provisioned

D.

when the mesh radio profile is created

Full Access
Question # 19

An administrator wants to implement the MultiZone feature in a company’s network to segregate corporate and guest traffic. Corporate traffic will have APs establish connections to a cluster managed by a Mobility Master (MM), and guest traffic will have the same APs establish connections to a standalone controller at the company’s DMZ.

What is true about the implementation of MultiZones in this scenario?

A.

The MultiZone feature must be enabled in the data zone.

B.

The primary zone maintains full control of AP management and configuration.

C.

The primary and data zones must be in the same L2 subnet.

D.

A MultiZone AP can initially connect to any zone to obtain its configuration.

Full Access
Question # 20

An administrator implements a standalone controller that runs ArubaOS 8.x. Which feature should the administrator configure to optimize the RF operation for the company’s WLAN?

A.

AirMatch

B.

Clustering

C.

ARM

D.

Zones

Full Access
Question # 21

An administrator deploys Aruba Mobility Controller 7005s to a company’s branch offices. The administrator wants to disable the console port to prevent unauthorized access to the controllers.

Which controller command should the administrator use to implement this policy?

A.

no console enable

B.

no mgmt-user console

C.

mgmt-user console-block

D.

console disable

Full Access
Question # 22

An administrator deploys an Aruba Mobility Controller 7005 to a branch office. The administrator accidentally disables the console port on the controller. Which controller command should the administrator use to re-enable the console part?

A.

mgmt-user console

B.

console enable

C.

console reset

D.

no mgmt-user console-block

Full Access
Question # 23

An administrator supports Aruba Mobility Controllers (MCs) managed by a Mobility Master (MM) in a noncluster deployment. The administrator performs these tasks on the MM for the MCs:

  • Enables L3 IP mobility for the respective VAPs on the MCs
  • Creates a L3 domain and places the MCs in the domain

However, roaming does not work when users roam from an AP connected to one controller in the domain to an AP connected to a different controller in the domain.

What must the administrator do to fix this problem?

D18912E1457D5D1DDCBD40AB3BF70D5D

A.

Configure the same VLANs on the Mobility Controllers in the L3 domain.

B.

Re-provision the APs associated with the Mobility Controllers.

C.

Enable L3 IP Mobility globally on the Mobility Controllers.

D.

Create a home-agent-to-foreign-agent mapping table.

Full Access
Question # 24

Refer to the exhibit.

Under which AirWave Management Platform (AMP) section should an administrator navigate to see the connection status between the AMP and managed device shown in the exhibit?

A.

Folders

B.

Aps/Devices

C.

VisualRF

D.

Device Setup

Full Access
Question # 25

An administrator wants to implement bandwidth limits to restrict employee access to high-risk web sites. On the Mobility Master (MM), where would the administrator define these limits?

A.

802.1X policy

B.

User role

C.

Firewall policy

D.

AAA policy

Full Access