You have a requirement to set up a NAS appliance into the EMC NetWorker environment. You have the remote username and passwords as well as the Fully Qualified Name (FQN) for the device and you wish to ensure that the NetWorker server can see the NDMP devices before the setup. Which command should be used to do this?
What is the function of Persistent Binding in an EMC NetWorker SAN environment?
A backup administrator is configuring an EMC NetWorker embedded storage node within an EMC Disk Library. To ensure that the embedded storage node is used to read the data during clone operations, what is required?
CL-1 is a client in an EMC NetWorker environment. The NetWorker server, NS-1, manages the environment and storage node SN-1A controls the data flow. You noticed that there are no entries in the /nsr/res/servers file on CL-1.
Which system is allowed to back up data from Client CL-1?
Refer to the exhibit.
In an EMC NetWorker environment, the storage node sn1 is down for maintenance. According to the client properties, what happens when the backup of the client starts?
A customer has a single-engine EMC Disk Library (EDL) and wants to enable the EMC NetWorker embedded storage node. How is this done?
Which method(s) can you use to display a list of unlabeled tape volumes in EMC NetWorker?
During a scheduled backup, what would EMC NetWorker do if a save set does not explicitly match any pool?
What application does the Enhanced Server Recovery option in EMC NetWorker allow us to interact with?
A Dell EMC NetWorker backup is configured as a probe-based backup. What must be configured in the workflow for this backup?
When Dell EMC NetWorker is integrated with a Data Domain system with DD Boost, what analyzes the data stored on the Data Domain and sends only the unique data for storage?
Which Dell EMC NetWorker resource represents a collection of NetWorker-labeled volumes?
After initiating a manual save, you receive the following error message:
39078:savE. SYSTEM error: manual saves are not enabled
What must you check to do a manual save?
What is a consideration for using the Dell EMC NetWorker block based backup feature?
You have successfully backed up three SQL servers with EMC NetWorker Module for SQL.
What needs to be done to recover SQL data?
Which Microsoft VSS component ensures that the application data is consistent when a shadow copy is created?
A customer has recently purchased a Data Domain appliance to use with EMC NetWorker as the primary storage. The backup administrator needs to configure EMC NetWorker so that multiple backups and recoveries can be performed from a single device at any given time. What type of device should the backup administrator configure?
Which EMC NetWorker feature allows for a failed backup to restart at a known good point prior to the backup failure?
A Dell EMC NetWorker administrator has a requirement for a CloudBoost solution that provides the following:
- Fast restore from local cache copies using site cache
- Low-cost cloud object storage for all backup copies
- Deduplication, encryption, and compression before transfer to the cloud
Which CloudBoost use case meets these requirements?
A Dell EMC NetWorker backup administrator is trying to restore Client A from Client B in the same datazone. After clicking the “Recover” option using NetWorker User for Windows, the administrator is not able to see Client A in the source window.
What is the reason for this issue?
What components are included with EMC NetWorker Module for Microsoft Applications?
A Dell EMC storage administrator has configured a client snapshot backups using NetWorker Snapshot Management. The backup completed successfully and the administrator is now ready to restore the data.
Which type of restore will destroy all existing data on the target application volume?
What is an EMC NetWorker host ID called in a clustered EMC NetWorker server?
Which tool is available to help determine and track source capacity usage in an EMC NetWorker environment?
Your Windows environment consists of several EMC NetWorker servers on the same subnet that is responsible for backing up only specific clients for security reasons. You need to change one backup client’s NetWorker server to allow it to be backed up by both NWServer-A and NWServer-B.
Which file do you need to change in order to meet this requirement?
Which Microsoft VSS component gathers information to properly save applications, services, or files in a filesystem?
An EMC NetWorker customer wants to perform a complete backup of a SQL server with three databases. Which save set name should be used?
A client save set is backed up to an EMC NetWorker backup pool and later cloned to a volume in a clone pool. On the volume, what property determines when the volume in the clone pool is a candidate for recycling?
In an EMC NetWorker environment, Auto Media Management is currently enabled on the autochanger. The customer requires unlabeled volumes in the autochanger to be used before recyclable volumes are reused.
In addition, the unlabeled volumes need to be automatically labeled before they are used. How can this be achieved?
An EMC NetWorker storage node has two advanced file type devices that stage the data to two physical LTO-4 drives. Due to a hardware issue, the administrator has disabled one of the LTO-4 drives.
How many nsrmmd processes are now running on the EMC NetWorker storage node?
You have been tasked to move the EMC NetWorker Management Console (NMC) from the EMC NetWorker server to an alternate server.
To utilize the new server as an NMC, what is the complete list of software that needs to be installed?
What command was used to see the following NDMP device?
scsidev@1.6.0:ADIC Scalar i2000 100A|Autochanger (Jukebox), /dev/mc_d6l0
S/N: 02TOK00200
ATNN=ADIC Scalar i2000 02TOK00200
Virtual device
scsidev@255.255.255:IBM ULTRIUM-TD4 7BG2|Tape, /dev/mt_d0l0
S/N: 1310056061
ATNN=IBM ULTRIUM-TD4 1310056061
WWNN=500104F000A11D3F
WWPN=500104F000A11D40
In an EMC NetWorker environment, regardless of what ports the service port range is set to, which two ports will nsrexecd always try to listen on?
A customer has an Oracle 11g database running on a RAC cluster with ASM. It occupies approximately 5 TB on a Symmetrix DMX. They have an RTO of four hours. They intend to implement PowerSnap with EMC NetWorker version 7.6 to back up the BCVs using RMAN scripts and a proxy host.
What prevents this implementation from being successful?
When adding an EMC NetWorker server's name into the /nsr/res/servers file of a client, which service must be restarted on the client for the change to take effect?